Pentek C1-20 Carbon Water Filters (20-inch x 2-1/2-inch) (100-Pack)
Availability: In stock
- Sized 20 x 2.5 inches
- Nominal 5 micron filtration
Available here in an economical 100-pack, Pentek C1-20 water filters produce healthier, better-tasting drinking water. Recommended for chlorinated water supplies and provide sediment filtration and bad/chlorine taste and odor reduction as tested by the manufacturer. These cartridges offer an economical solution for all of your residential and general purpose water filtration needs. They also make excellent polishing filters when used in process or closed-loop streams. Constructed of a carbon-impregnated cellulose media, these dual-purpose cartridges filter out fine sediment particles and reduce unwanted taste, odor and chlorine taste and odor from your tap water. The Pentek C1-20 water filters have a polyester reinforcement backing and external netting that provide additional strength and dirt-loading capacity.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
NOTE: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor, switch to a synthetic media cartridge or consult the manufacturer.
NOTE: Increased flow rates may result in less effective chlorine reduction.
|Used In Brands||Ametek, Culligan, Pentek, US Filter|
|Advertised Size (in)||20 x 2-1/2|
|Media||Carbon Impregnated Pleated Cellulose|
|Primary Filter Media||Carbon Wrapped|
|Materials of Construction||Filter Core: Polypropylene, Netting: Polyethylene, Reinforcement Backing: Cellulose Polyester, End Caps: Vinyl Plastisol|
|Filter Life (gallons)||5000|
|Filter Life (liters)||18927.05|
|Micron Rating (Nominal)||5|
|Operating Temperature (°F)||40 - 125|
|Operating Temperature (°C)||4.4 - 51.7|
|Flow Rate (gpm)||5|
|Flow Rate (lpm)||18.927|
The PENTEK_C1_20_100_PACK is comparable with the following part numbers