10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)

SKU
TIER1-P5-10BB
Price $10.99
Availability: BackOrder
Fits most stand housings built for 10-inch x 4.5 inch filter cartridges
Choose a quantity
  • 1 Filter $10.99  
  • 3 Filters Price $10.63 each
  • 6 Filters Price $10.28 each
  • Ships fast!
  • Reduces contaminants down to 5 micron
  • Made from polypropylene filter media
  • Standardized size for convenience and compatibility
See more product details

TIER1-P5-10BB Filter Advantages

The Pentek DGD-5005 comparable whole house sediment water filter by Tier1 is a 5 micron polypropylene filter that goes to work immediately reducing the contaminants that plague your drinking water. Contaminants reduced by this filter include dirt, particles, sand, sediment, and silt. The P5-10BB by Tier fits most standard 10-inch x 4.5-inch housings, making it an ideal solution for numerous settings. With simple installation and replacement steps you can replace your existing cartridge as needed when ever you need. Order today!

Polypropylene Filter Cartridge

Polypropylene media inhibits bacterial growth making it an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you wont have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point of use systems.

Standardized Filter Sizing

The 10 X 4.5 spun wound polypropylene replacement filter by Tier1 is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 4.5 inch filters. The P5-10BB goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.

Package Qty 1
Used In Brands Pentek, Tier1
Manufacturer's Id P5-10BB
UPC 799932624933
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 10
Flow Rate (lpm) 37.8541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes One 10 x 4.5 inch Tier1 Spun Wound Polypropylene Filter
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1-P5-10BB reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt

The TIER1-P5-10BB is comparable with the following part numbers

5005 355217-43 DGD5005 DGD-5005
P510BB PENTEK-DGD-5005 WDGD 5005 WDGD-5005
155357-43 155357-43 355217-43 DGD-5005
P5-10BB Pentek-DGD-5005 TIER1-P5-10BB WDGD
WDGD-5005

The TIER1-P5-10BB fits the following model numbers

CULLIGAN-HD-950
PENTEK-153029
WHKF-DWHBB
WHKFDWHBB

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Insert new filter cartridge
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions