We use cookies to make your experience better.
10 X 4.5 Carbon Block Replacement Filter by Tier1 (5 micron)
1 filter $26.99 3 filters $25.39 each 6 filters $24.29 each
- Ships fast!
- Reduces impurities down to 5 micron
- Drop-in cartridge changes are quick and easy
- Filters contaminants down to 5 microns in size!
- Ships fast!
- Reduces impurities down to 5 micron
- Drop-in cartridge changes are quick and easy
- Filters contaminants down to 5 microns in size!
Comparable to the Pentek EP-BB, the Tier1 EP5-10BB reduces chlorine taste and odor in your drinking water. Manufactured to reduce impurities down to 5 micron, this Tier1 filter goes to work immediately improving the taste of your drinking water. Designed to fit systems requiring a 10-inch x 4.5-inch filter, the applications of this filter are universal. Use this filter as a proprietary filter or as a pre-filter for a whole home solutions system or point of use system. Order the the Tier1 EP5-10BB whole house carbon block water filter by Tier1 today.
Carbon media, whether as granular activated carbon or as a carbon block functions as a fantastic water filtration media due to its incredibly high porosity. This high porosity maximizes the surface area contaminants are exposed to and ensures that contaminants have a great chance of being captured and reduced from your drinking water. Carbon filters are known for being effective at reducing the unpleasant taste and odors associated with city water chlorine treatment. If you are looking for better tasting water with excellent contaminant reduction try out a carbon filter today!
Universal Filter Sizing
The 10 X 4.5 Tier1 EP5-10BB carbon block replacement filter is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring this size filter. The EP5-10BB goes to work immediately providing cleaner, fresher water for up to six months or 5,500 gallons, depending on water quality and use. Enjoy cleaner better water with your whole house replacement filter today.
Reduced Contaminants
The TIER1-EP5-10BB reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Sand
- Sediment
- Silt
The TIER1-EP5-10BB is comparable with the following part numbers
EP5-BB | EP5-10BB |
EP510BB | EP-BB |
PENTEK-155548 | EV910805 |
CG5-104 | 4PCD1 |
155548-43 |
Instructions
- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.