We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
20 X 2.5 Carbon Block Replacement Filter by Tier1 (10 micron)
SKU
TIER1-EPM10-20
Price $29.99 List Price Price $42.99 Save 30%
Availability: In Stock
Choose a quantity
1 filter $29.99 3 filters $28.22 each 6 filters $26.99 each
- Powder Activated Carbon Block
- Engineered for contaminant reduction AND filter cartridge life
- Fits many common housings with a 20 inch by 2.5 inch size
- Designed to fit the Pentek 155635-43 and Pentek EPM-20
› See more product details
- Powder Activated Carbon Block
- Engineered for contaminant reduction AND filter cartridge life
- Fits many common housings with a 20 inch by 2.5 inch size
- Designed to fit the Pentek 155635-43 and Pentek EPM-20
The Pentek EPM-20 Comparable water filter by Tier1 is a 20 x 2.5 inch whole house water filter for municipal and well water applications that require reduction of sand, sediment, dirt, chlorine taste and odor. Powder Activated Carbon Block filter media reduces contaminants like dirt, chlorine taste and odor down to 10 microns to meet your filtering challenges head on. Order today!
Reduced Contaminants
The TIER1-EPM10-20 reduces the following contaminants:
- Chlorine Taste & Odor
- Dirt
- Sand
- Sediment
The TIER1-EPM10-20 is comparable with the following part numbers
PENTEK EPM-20 | Culligan EPM-20 |
PENTEK-155635-43 | PENTEK-15563543 |
Ametek EPM-20 | Bruner EPM-20 |
Hydronix CB-25-2010 | Kleen Plus EPM-20 |
KX MATRIKX-CTO 03-250-125-20 | Plymouth Products EPM-20 |
US Filter EPM-20 |
Instructions
- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.