20 X 2.5 Polypropylene Replacement Filter by Tier1 (5 micron)

SKU
TIER1-P5-20
Price $11.99
Availability: In stock
Fits most stand housings built for 20-inch x 2.5 inch filter cartridges
Choose a quantity
  • 1 Filter $11.99  
  • 3 Filters Price $11.28 each
  • 6 Filters Price $10.79 each
  • Ships fast!
  • Quick and easy installation and replacement
  • Provides great tasting, cleaner and fresher water
  • Goes to work reducing contaminants for up to six months
See more product details

TIER1-P5-20 Filter Advantages

The Pentek P5-20 comparable whole house sediment water filter by Tier1 is a 5 micron polypropylene filter that goes to work immediately reducing the contaminants that plague your drinking water. Contaminants reduced by this filter include dirt, particles, sand, sediment, and silt. The P5-20 by Tier fits most standard 20-inch x 2.5-inch housings, making it an ideal solution for numerous settings. With simple installation and replacement steps you can replace your existing cartridge as needed when ever you need. Order today!

Polypropylene Filter Cartridge

Polypropylene media inhibits bacterial growth making it an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you wont have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point of use systems.

Standardized Filter Sizing

The 20 X 2.5 spun wound polypropylene replacement filter by Tier1 is built to fit 20-inch x 2.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 20 x 2.5 inch filters. The P5-20 goes to work immediately providing cleaner, fresher water for up to two months. Enjoy cleaner better water with your whole house replacement filter today.

Package Qty 1
Used In Brands Culligan, Pentek, Tier1, Whirlpool
Manufacturer's Id P5-20
UPC 799932624940
Advertised Size (in) 20 x 2-1/2
Actual Size (in) 20 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 50.8 x 6.35
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 2 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.8541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes One 20 X 2.5 Inch Polypropylene Replacement Filter by Tier1
Primary Filter Media Polypropylene

Contaminants

Reduces the following contaminants:

  • Dirt
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The TIER1-P5-20 is comparable with the following part numbers

1193047 1194282 1227868-V 15-052-03
155796-43 200144 252-050 255695
255695-43 33003033 4621-43 55410-27
93047 9320-1143 94282 AP110-2C
CFS110-C20 COR205 COR220 ED-S-2
FPMB-520 FPMB5-20 FPMB520 GX05-20
PD-5-20 PFS205 PS5-20C PX05-20
SD-25-2005 SDF-25-2005 SW5-2 SWS-20
VX05-20 PENTEK-P5-20 P5-20 155016-43

The TIER1-P5-20 fits the following model numbers

HFPP-1-PR20
W20FFPH1CBPR
BBFS-22

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Insert new filter cartridge
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions