Rusco 3/4-30-F Polyester Screened Spin-Down Filter System
The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC. The Rusco sediment filters use centrifugal separation technology to filter sediment from water. The Rusco filtration system has a polyester screen filter. The Rusco filter system's filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. Rusco water filtration systems are made from molded non-corrosive materials.
|Used In Brands||Rusco|
|Actual Size (in)||11 3/8 inches (length) x 7 1/4 inches (width)|
|Actual Size (cm)||28.90 x 18.41|
|Media||Spin-Down Filter System|
|Materials of Construction||Body Material: PVC, Screen Material: Polyester, Cover Material: High Impact Polymer Resin|
|Micron Rating (Nominal)||533|
|Operating Pressure (psi)||0 - 150|
|Operating Temperature (°F)||40 - 100|
|Operating Temperature (°C)||4.4 - 37.8|
|Flow Rate (gpm)||25|
|Flow Rate (lpm)||75.708|
|Fitting Size (inches)||3/4 inch|
Reduces the following contaminants:
The RUSCO-34-30-F is comparable with the following part numbers
The RUSCO-34-30-F fits the following model numbers
- Install in a location that is protected from impact, freeze, excessive heat, chemical contact and water hammer.
- Install in the vertical position with the purge outlet pointing down.
- Install filter on discharge side of pump, allowing filter to be cleaned by purging through the flush valve.
- Refer to arrows on the filter body for correct water flow direction.