Rusco 3/4-500ST-F Polyester Screen Sediment Trapper System
|Used In Brands||Rusco|
|Actual Size (in)||14 3/8 inches (length) x 7 1/4 inches (width)|
|Actual Size (cm)||36.51 x 18.41|
|Primary Filter Media||Polyester|
|Micron Rating (Nominal)||30|
|Operating Pressure (psi)||0 - 150|
|Operating Temperature (°F)||40 - 100|
|Operating Temperature (°C)||4.4 - 37.8|
|Flow Rate (gpm)||25|
|Flow Rate (lpm)||75.708|
|Fitting Size (inches)||3/4 inch|
|Additional Information||Service flow rate: 10 GPM|
The RUSCO-34-500ST-F reduces the following contaminants:
The RUSCO-34-500ST-F is comparable with the following part numbers
The RUSCO-34-500ST-F fits the following model numbers
- Install in a location that is protected from impact, freeze, excessive heat, chemical contact and water hammer.
- Install in the vertical position with the purge outlet pointing down.
- Install filter on discharge side of pump, allowing filter to be cleaned by purging through the flush valve.
- Refer to arrows on the filter body for correct water flow direction.