Rusco 3/4-60ST-F Polyester Screen Sediment Trapper System

The Rusco sediment trapper filters use centrifugal separation technology to filter sediment from water. The Rusco Sediment Trapper has a unique element design that traps sediment in the lower reservoir of the clear cover. The debris settles in the bottom of the clear cover away from the filter screen. The Rusco Sediment Trapper model should be used over the Rusco Spin-Down model when there is heavy sediment in the water supply. The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC. The Rusco filtration system has a polyester screen filter. The Rusco filter system's filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. Rusco water filtration systems are made from molded non-corrosive materials.

• Made in the U.S.A.
• Genuine OEM Product

Reduces the following contaminants:

• Dirt
• Sand
• Sediment
• Silt

Used In Brands	Rusco
Manufacturer's Id	3/4-60ST-F
UPC	659498013902
Actual Size (in)	14 3/8 inches (length) x 7 1/4 inches (width)
Actual Size (cm)	36.51 x 18.41
Mesh Size	60
Media	Mesh Filter
Materials of Construction	Body Material: PVC, Screen Material: Polyester, Cover Material: High Impact Polymer Resin
Micron Rating (Nominal)	254
Operating Pressure (psi)	0 - 150
Operating Temperature (°F)	40 - 100
Operating Temperature (°C)	4.4 - 37.8
Flow Rate (gpm)	25
Flow Rate (lpm)	75.708
Fitting Size (inches)	3/4 inch
Additional Information	Service flow rate: 10 gpm

• Rusco 3/4-60ST-F Sediment Trapper Filter System Replacement Parts:
• Rusco .75CST Sediment Trapper Replacement Filter Cover
• Rusco .75B Replacement Filter Head
• Rusco FS-3/4-60ST Polyester Replacement Filter Screen
• Rusco .75OR Replacement O-Ring Kit
• Rusco SS1.5 Sun Shield is an optional accessory to block sunlight from coming through the clear cover.
• Rusco .5FV Replacement Manual Flush Valve
• The Rusco AFV Automatic Flush Valve is an optional accessory for automating the flushing of the Rusco filter system.

Instructions

1. 1. Install in a location that is protected from impact, freeze, excessive heat, chemical contact and water hammer.
2. 2. Install in the vertical position with the purge outlet pointing down.
3. 3. Install filter on discharge side of pump, allowing filter to be cleaned by purging through the flush valve.
4. 4. Refer to arrows on the filter body for correct water flow direction.