Rusco FS-1-200SS Spin-Down Steel Replacement Filter

SKU
RUSCO-FS-1-200SS
Price $18.99
Availability: In stock
  • Advertised size includes ball valve attachment
See more product details
Rusco sediment filters make solid particle removal simple and economical. The Rusco replacement filter screen can be cleaned several times before needing to be replaced. The Rusco filter screen is easy to clean. No tools required. This Rusco replacement filter element is made of stainless steel for heavy duty sediment filtration. The Rusco sediment screen elements are also available in polyester.
Package Qty 1
Used In Brands Rusco
Manufacturer's Id FS-1-200SS
UPC 659498016781
Advertised Size (in) 11-3/8 x 5
Actual Size (in) 5 1/4 inches (length) x 1 5/8 inches (outside diameter)
Actual Size (cm) 13.335 x 4.1275
Mesh Size 200
Media Stainless Steel Screen
Primary Filter Media Spindown
Micron Rating (Nominal) 74
Fitting Size (inches) 1 inch

Contaminants

Reduces the following contaminants:

  • Dirt
  • Sand
  • Sediment
  • Silt

Instructions

  1. After you have installed your Rusco system, you can simply turn the flush valve parallel with the system when you notice excessive buildup of sediment
  2. You should clean your filter screens every few months and replace them every 6-12 months depending on your water usage
  3. The primary method of cleaning the Rusco filter is purging separated solids through the flush valve while the filter is under system pressure (can be done manually with the flush valve or automated with the optional Automatic Flush Valve)
  4. The filter element may need to be removed and cleaned
  5. To remove the filter element turn off the water supply and drain water pressure
  6. Unscrew the clear cover and remove the filter element
  7. Wash off collected sediment by spraying with water
  8. Remove fine particles wedged in the screen with a soft brush
  9. Apply silicone grease to o-rings, if needed, and reassemble
  10. HAND TIGHTEN ONLY

Reset Instructions