Rusco FS-3/4-200STSS Sediment Trapper Steel Replacement Filter

SKU
RUSCO-FS-34-200STSS
Price $26.99
Availability: In stock
Rusco sediment filters make solid particle removal simple and economical. The Rusco replacement filter screen can be cleaned several times before needing to be replaced. The Rusco filter screen is easy to clean. No tools required. This Rusco replacement filter element is made of stainless steel for heavy duty sediment filtration. The Rusco sediment screen elements are also available in polyester.
Package Qty 1
Advertised Size (in) 5-1/4 x 1-3/16
Actual Size (in) 14 3/8 inches (length) x 5 inches (width)
Media Stainless Steel Screen
Primary Filter Media Spindown
Micron Rating (Nominal) 75
Fitting Size (inches) 3/4 inch

Reduced Contaminants

The RUSCO-FS-34-200STSS reduces the following contaminants:

  • Coarse Sand
  • Extra Fine Sand
  • Fine Sand
  • Hard Scale
  • Sediment

Instructions

  1. After you have installed your Rusco system, you can simply turn the flush valve parallel with the system when you notice excessive buildup of sediment. This will drain out the sediment and you can continue to use your system
  2. You should clean your filter screens every few months. You should replace your filter screens every 6-12 months depending on your water usage
  3. The primary method of cleaning the Rusco filter is purging separated solids through the flush valve while the filter is under system pressure
  4. The purging process can be done manually with the flush valve or automated with our optional Automatic Flush Valve
  5. The filter element may need to be removed and cleaned
  6. To remove the filter element, turn off the water supply, drain water pressure, unscrew the clear cover and remove the filter element
  7. Wash off collected sediment by spraying with water
  8. Remove fine particles wedged in the screen with a soft brush
  9. Apply silicone grease to o-rings if needed and reassemble
  10. HAND TIGHTEN ONLY

Reset Instructions