Rusco 1-1/4-140 HT-F Hot Water Spin-Down Filter System
The Rusco hot water filter can operate up to 200 degrees F (93C) because of its industrial grade parts. The Rusco hot water filter systems come with female threads with a stainless steel reinforcing ring over the inlet and outlet. The Rusco filter system uses centrifugal separation technology to filter large sediment from water. The Rusco filters have a cover through which sediment is visible. The Rusco High Temperature filter has a flush outlet for one step purging. The Rusco Sediment Filter has a durable and reusable stainless steel filter screen. The Rusco Hot Water Filtration Systems have stainless steel reinforced pipe connections. The Rusco High Temperature Sediment Filter has a hand tightened cover that requires no tools to remove and clean.
|Used In Brands||Rusco|
|Actual Size (in)||11 3/8 inches (height) x 5 inches (width)|
|Actual Size (cm)||36.51 x 12.7|
|Primary Filter Media||Polypropylene|
|Materials of Construction||Body Material: Polypropylene with 304 Stainless Steel Support Ring, O-Rings: Buna-N, Cover Material: Chemical and Heat Resistant HP Polymer, Flush Valve: CPVC|
|Micron Rating (Nominal)||104|
|Operating Pressure (psi)||0 - 150|
|Operating Temperature (°F)||40 - 200|
|Operating Temperature (°C)||4.4 - 93.3|
|Flow Rate (gpm)||10.00|
|Flow Rate (lpm)||37.80|
|Fitting Size (inches)||1-1/4 inches|
- Install in a location that is protected from impact, freeze, excessive heat, chemical contact and water hammer.
- Install in the vertical position with the purge outlet pointing down.
- Install filter on discharge side of pump, allowing filter to be cleaned by purging through the flush valve.
- Refer to arrows on the filter body for correct water flow direction.