Rusco 1-140-F Polyester Screened Spin-Down Filter System
|Used In Brands||Rusco|
|Actual Size (in)||11 1/2 inches (length) x 3 inches (width)|
|Actual Size (cm)||29.21 x 7.62|
|Primary Filter Media||Polyester|
|Materials of Construction||Cover Material: High Impact Polymer Resin, Screen Material: Polyester, Body Material: PVC|
|Micron Rating (Nominal)||104|
|Operating Pressure (psi)||0 - 150|
|Operating Temperature (°F)||40 - 100|
|Operating Temperature (°C)||4.4 - 37.8|
|Flow Rate (gpm)||10.00|
|Flow Rate (lpm)||37.80|
|Fitting Size (inches)||1 inch|
|Additional Information||Service flow rate: 10 GPM|
The RUSCO-1-140-F reduces the following contaminants:
- Coarse Sand
- Extra Fine Sand
- Fine Sand
- Install in a location that is protected from impact, freeze, excessive heat, chemical contact and water hammer.
- Install in the vertical position with the purge outlet pointing down.
- Install filter on discharge side of pump, allowing filter to be cleaned by purging through the flush valve.
- Refer to arrows on the filter body for correct water flow direction.