Tier1 10 Panel Water Test Kit

SKU
TIER1-10P-TK
Price $18.95
Availability: In stock
Choose a quantity
  • 1 Filter $18.95  
  • 3 Filters Price $18.39 each
  • 6 Filters Price $17.79 each
  • Do it yourself home testing
  • Immediate results
  • Easy to use
  • Distinctive color coded results
See more product details
The Tier1 10 Panel Water Test Kit is your reliable home water test to assure the quality of your water is safe to drink with few contaminants. This ten test kit allows you to test for Iron, Copper, Nitrate and Nitrite, Sulfate, Total Dissolved Solids, pH, Total Alkalinity, Total Chlorine, and Total Hardness. With easy step by step test instructions and color coded result charts, you can complete this test in a matter of minutes from your own home. Ensure the safety of your water and well being with the Tier1 10 Panel Water Test Kit today!
Package Qty 1
Manufacturer's Id 10P-TK
UPC 810004472143
Actual Size (in) 8 inches (Length) x 4 inches (Width)

Instructions

  1. For every test, draw 250 ml (8oz) of fresh water into a clean cup (do not reuse the same water for multiple tests). Follow instructions for each specified test, listed below.
  2. For the 4 in 1 (pH, Total Alkalinity, Total Chlorine, and Total Hardness) test: Dip strip in water for 5 seconds with gentle back and forth motion. Remove test strip from the water and give it a single brisk shake to remove excess water, then wait 10 seconds. After 10 seconds have passed, match strip with the results chart within the next 10 seconds for most accurate reading. Record matched result for future reference.
  3. For the Iron, (Fe) test: Dip strip in water for 1 second with gentle back and forth motion. Remove test strip from the water and give it a single brisk shake to remove excess water. While waiting 30 seconds after removing the strip from the water, fold the strip at the midpoint back and under the aperture for a white background and more accurate color reading. After 30 seconds have passed, match strip with the results chart within the next 20 seconds for most accurate reading. Record matched result for future reference.
  4. For the Copper, (Cu) test: Dip strip in water for 15 seconds with gentle back and forth motion. Remove test strip from the water and give it a single brisk shake to remove excess water. While waiting 30 seconds after removing the strip from the water, fold the strip at the midpoint back and under the aperture for a white background and more accurate color reading. After 30 seconds have passed, match strip with the results chart within the next 20 seconds for most accurate reading. Record matched result for future reference.
  5. For the 2 in 1 (Nitrate and Nitrite) test: Dip strip in water for 2 seconds with NO motion. After removing test strip from the water DO NOT shake to remove excess water, then wait 60 seconds. After 60 seconds have passed, match strip with the results chart within the next 60 seconds for most accurate reading. Record matched result for future reference.
  6. For the Sulfate test: Dip strip in water for 10 seconds with gentle back and forth motion. Remove test strip from the water and give it a single brisk shake to remove excess water, then wait 20 seconds. After 20 seconds have passed, match strip with the results chart within the next 20 seconds for most accurate reading. Record matched result for future reference.
  7. For the Total Dissolved Solids (TDS) test: Dip strip in water for 2 seconds with gentle back and forth motion. Remove test strip from the water and give it a single brisk shake to remove excess water, then wait 10 seconds. After 10 seconds have passed, match strip with the results chart within the next 20 seconds for most accurate reading. Record matched result for future reference.

Reset Instructions