Tier1 Brand Replacement Pool and Spa Filter for 20042, 370-0242 & 370-0243

SKU
TIER1-PAS-1420
Price $21.95
Availability: In stock
Fits Pacific Marquis, Filbur FC-0195
  • Worry-free sediment reduction for 3 months
  • Pleated filter design captures and retains more particles
  • Comparable to Filbur FC-0195
  • Pleats can be rinsed to prolong effective life
See more product details
Tier1 PAS-1420 Replacement Pool and Spa Filter fits systems that use 5 1/4-inch diameter by 12 3/16-inch length filters. Tier1 Pool and Spa filters feature high durability filter fabric that maintains strength even when loaded with sediment, a tighter porosity and denser weave to capture more contaminants in less time, and a high strength, high flow core designed to support the filter while providing industry leading flow rates. Tier1 Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Pleated design allows more contaminant retention and can be rinsed for increased longevity and service life. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations. Dive in with Tier1, the water's great!
Package Qty 1
Replaces Filbur FC-0195
Replaces Pleatco PPM35SC-F2M
Replaces Unicel 5CH-352
Pool/Spa Manufacturer Tier1
Manufacturer's Id PAS-1420
UPC 700355942955
Bottom Hole Size 2 inches
Media Weight (oz) 3
Media Square Feet 35
Actual Size (in) 12 3/16 inches (length) x 5 1/4 inches (outside diameter)
Actual Size (cm) 30.96 x 13.335
Primary Filter Media Pleated Fabric
Filter Life (months) 3 months
Warranty Guarantee 30 day 100% satisfaction guarantee
Primary Filter Media Pleated Fabric

Reduced Contaminants

The TIER1-PAS-1420 reduces the following contaminants:

  • Sand
  • Sediment

The TIER1-PAS-1420 is comparable with the following part numbers

20042 5CH-352
FC-0195 PAS-1420
PPM35SC-F2M R173314
SD-01119 370-0242
370-0243 FC-0196
FC0196

Instructions

  1. It is time to clean or replace your filter cartridge when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when a new cartridge has been installed.
  2. It is also time to clean or replace your filter cartridge if there is a noticeable decrease in the pressure coming from your return jets.
  3. Turn the power off to your pump and bleed the excess air pressure of the system using the air valve on the filter.
  4. Remove any band clamps and/or lids to your filter.
  5. Remove the cartridge from the filter canister and dislodge any loose debris by directing a stream of water from a garden hose between each pleat.
  6. Do not use a high pressure car wash wand or a stiff brush to clean your cartridge. These abrasive methods may damage the filter media and snap the bands.
  7. Apply a spray on filter cleaner to the cartridge or grid to remove any oils or other organics. If stubborn stains persist, soak the cartridge overnight in a solution of TSP (trisodium phosphate).
  8. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.
  9. Restart your filtration system per manufacturer’s instructions.

Reset Instructions