Tier1 Brand Replacement Pool and Spa Filter for CX500-RE, R173409 & 27-079

SKU
TIER1-PAS-1057
Price $30.99
Availability: In Stock
Fits the Hayward Star-Clear C500, Pentair Purex CF-50 and American Commander 50
  • Worry-free sediment reduction for 3 months
  • Cost-effective replacement
See more product details
Tier1 PAS-1057 Replacement Pool and Spa Filter fits the Hayward Star-Clear C500, R173409 & 27-079, Pentair Purex CF-50 and American Commander 50. Tier1 Pool and Spa filters feature high durability filter fabric that maintains strength even when loaded with sediment, a tighter porosity and denser weave to capture more contaminants in less time, and a high strength, high flow core designed to support the filter while providing industry leading flow rates. Tier1 Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Pleated design allows more contaminant retention and can be rinsed for increased longevity and service life. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations. Dive in with Tier1, the water's great!
Package Qty 1
Replaces Filbur FC-1240
Replaces Pleatco PA50
Replaces Unicel C-7656
Pool/Spa Manufacturer Tier1
Manufacturer's Id PAS-1057
UPC 799932630576
Bottom Hole Size 3 inches
Media Weight (oz) 4
Media Square Feet 50
Actual Size (in) 19 3/4 inches (length) x 7 inches (outside diameter)
Actual Size (cm) 50.17 x 17.78
Primary Filter Media Pleated Fabric
Filter Life (months) 3 months
Warranty Guarantee 30 day 100% satisfaction guarantee
Primary Filter Media Pleated Fabric

Reduced Contaminants

The TIER1-PAS-1057 reduces the following contaminants:

  • Sand
  • Sediment

The TIER1-PAS-1057 is comparable with the following part numbers

C-7656 CX500-RE FC-1240 PA50
PA50-4 PA50-M PAS-1057 PAS-1058
PAS-1059 PPF50 PPF50-4 R173409
SD-00096 27-079

The TIER1-PAS-1057 fits the following model numbers

C500
CF-50
American Commander 50

Instructions

  1. It is time to clean or replace your filter cartridge when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when a new cartridge has been installed.
  2. It is also time to clean or replace your filter cartridge if there is a noticeable decrease in the pressure coming from your return jets.
  3. Turn the power off to your pump and bleed the excess air pressure of the system using the air valve on the filter.
  4. Remove any band clamps and/or lids to your filter.
  5. Remove the cartridge from the filter canister and dislodge any loose debris by directing a stream of water from a garden hose between each pleat.
  6. Do not use a high pressure car wash wand or a stiff brush to clean your cartridge. These abrasive methods may damage the filter media and snap the bands.
  7. Apply a spray on filter cleaner to the cartridge or grid to remove any oils or other organics. If stubborn stains persist, soak the cartridge overnight in a solution of TSP (trisodium phosphate).
  8. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.
  9. Restart your filtration system per manufacturer’s instructions.

Reset Instructions