X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Tier1 10 inch x 4.5 inch String Wound Sediment Water Filter (20 Micron)

SKU
TIER1-SWC-45-1020
Price $16.58 List Price Price $23.99 Save 30%
Availability: In Stock
Fits 10-inch Big Blue filter housings
Choose a quantity
  • 1filter$16.58 
  • 3filters$15.50each
  • 6filters$14.43each
Available Add-Ons
x

SKU: TIER1-OR-LUBRICANT-LG › See more product details

Dow Corning Molykote 111 O-Ring Silicone Lubricant (5.3 oz. Tube)

Add: $42.99 $29.99

American Plumber, Culligan, Pentek OR-100 O-Ring for Big Blue Housings

Add: $9.99 $6.99
  • Universally sized to fit in most 10 x 4.5 Big Blue housings
  • Best cost effective filter on the market
  • Polypropylene cord
  • Can be used in a variety of applications
› See more product details
  • Universally sized to fit in most 10 x 4.5 Big Blue housings
  • Best cost effective filter on the market
  • Polypropylene cord
  • Can be used in a variety of applications
The Tier1 10 inch x 4.5 inch string wound sediment water filter (20 Micron) is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. Tier1 cartridges are made from 100% polypropylene cord. Tier1 filter cartridges are suitable for residential as well as commercial applications. This Tier1 polypropylene string wound filter fits most 10-inch Big Blue Filter Housings and is suitable for both well and municipal water. The Tier1 string wound water filter should be changed when a decrease in pressure is noticed. A comparable product may be substituted. Not intended for use with water that is microbiologically unsafe.
More Information
Package Qty 1
Used In Brands Hydronix, Tier1
Manufacturer's Id SWC-45-1020
UPC 641945741773
Advertised Size (in) 10 x 4-1/2
Media Type Sediment Filter
Media String Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 6 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 20
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 10
Warranty Guarantee Unconditional Guarantee for Life of the Product

Reduced Contaminants

The TIER1-SWC-45-1020 reduces the following contaminants:

  • Dirt
  • Hard Scale
  • Rust and Corrosion
  • Sand
  • Silt

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Insert new filter cartridge
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation