We use cookies to make your experience better.
O-Ring Silicone Grease (0.2 oz Packet)
SKU
TIER1-OR-LUBRICANT-SM
Price $4.99 List Price Price $6.99 Save 28%
Availability: In Stock
Choose a quantity
1 filter $4.99 3 filters $4.70 each 6 filters $4.49 each
Dow Corning 111 valve lubricant and sealant. Meets FDA 21 CFR 175.300. The o-ring sealant package contains 0.2 oz of lubricant. Use this o-ring Silicone Grease on all brands of Water Filter Housing O-Rings and all Reverse Osmosis System O-Rings. O-Ring lubricant prevents leaks and improves sealing of the o-ring. Should I use a lubricant on my O-Ring? If you choose to reuse your water filter housing o-rings, you should use a lubricant on them to keep them effective. You should only use a special silicone lubricant. Do I need to lubricate the gasket on the filter cartridge? Generally, no, because each replacement filter cartridge comes with its own new gasket if one is needed. The rubber gasket is the top or bottom part of the replacement filter cartridge and is not the same as the o-ring.
Package Qty | 1 |
---|---|
Used In Brands | Tier1 |
Manufacturer's Id | OR-LUBRICANT-SM |
UPC | 799932614590 |
Container Size (ml) | 5.9147 |
Operating Temperature (°F) | 40 - 200 |
Country of Manufacture | United States |
Warranty Guarantee | Unconditional Product Guarantee for Life of the Product |
Additional Information | Contains: 63148-62-9 Polydimethylsiloxane, 7631-86-9 Silica, Amorphous, 70131-67-8 Dimethyl Siloxane, Hydroxy-terminated |
The TIER1-OR-LUBRICANT-SM is comparable with the following part numbers
COMP-OR-LUBRICANT-SM |
OR-LUBRICANT-SM |
DOW 111 COMPOUND |
MOLYKOTE 111 |
MOLYKOTE |
Instructions
- First, wipe your old O-Ring clean
- Then wipe the groove in the filter housing clean
- Finally, apply enough lubricant on the O-Ring to give it a gloss
- The O-Ring is ready to place back in the housing
- If the O-Ring is bent, crimped, or showing signs of wear, you should replace the o-ring