Tier1 P5-30 Sediment Water Filters (1 Case / 20 Filters)

SKU
TIER1_P5_30_20_PACK
Price $128.99

Availability: In stock

Price as configured $128.99

The Tier1 P5-30-WF Sediment Depth Filter is a 5 micron filter. The Tier1 P5-30-WF Sediment Water Filter measures 30-inch x 2-1/2-inch. The Tier1 P5-30-WF Polypropylene Prefilter has graded density for higher dirt-holding capacity. Tier1 P5-30-WF water filter cartridges are made of 100% pure polypropylene. These are perfect prefilters for drinking water systems, Reverse Osmosis Systems, ice machines, and more. The Tier1 P5-30-WF is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only. The Tier1 P5-30-WF depth water filter removes dirt, particulate, sediment, sand, and silt for improved filtered water. The Tier1 P5-30-WF filter should be replaced approximately every 3 months depending on your water quality and usage. UPC 689466299861.
Package Qty 20
Advertised Size (in) 30 x 2-1/2
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 120 months
Micron Rating (Nominal) 5
Flow Rate (gpm) 15
Flow Rate (lpm) 56.78
Warranty Guarantee Unconditional Product Guarantee for Life of the Product

Instructions

  1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump. If there is any damage to the o-ring, you need to replace it
  2. After cleaning the o-ring, apply silicone lubricant, like OR-LUBRICANT-SM
  3. You must use a silicone food grade lubricant. All other types of lubricant could damage the o-ring. Silicone Lubricant prevents leaking and extends the life of the o-ring

Reset Instructions