X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Tier1 Pentek DGD-5005 155357-43 Spun Polypropylene Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant (10 inches x 4-1/2 inches)

SKU
TIER1_FHR_10_45_SEDIMENT_KIT
Price $18.99
Availability: In Stock

Price as configured $18.99

  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Tier1 filters are big on performance, not on price
See more product details
The 10 x 4.5 inch Tier1 Pentek DGD-5005 155357-43 Spun Polypropylene Filter Cartridge Comparable Replacement Kit includes everything necessary for no hassle filter change maintenance. The exclusive kit includes a 5 micron polypropylene Pentek DGD-5005 comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and all components you need to finish the job in one easy procedure. Water taste and quality is critical business, the Tier1 Pentek DGD-5005 155357-43 Spun Polypropylene Filter Cartridge Comparable Replacement Kit reduces dirt, rust and corrosion while it captures sediment as small as 5 microns. The system installs quickly and easily, order today!
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-SEDIMENT
UPC 641945752298
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 10
Flow Rate (lpm) 37.8541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes DGD-5005 Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1_FHR_10_45_SEDIMENT_KIT reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions