X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Welcome to WaterFilters.Net | Free Shipping on Orders Over $99* | Contact Us | 1-888-801-7873
Search
My Cart

Tier1 Pentek DGD-5005-20 Comparable 155358 Spun Polypropylene Filter Cartridge Replacement Kit with O-ring and Lubricant

SKU
TIER1_FHR_20_45_SEDIMENT_KIT
main product photo
Price $26.99 List Price Price $38.99 Save 30%
Availability: In Stock
  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Tier1 filters are big on performance, not on price
› See more product details
Shipping
Return Policy
  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Tier1 filters are big on performance, not on price
The 20 x 4.5 inch Tier1 Pentek DGD-5005-20 Comparable 155358 Spun Polypropylene Filter Cartridge Replacement Kit includes everything you need for a no hassle filter change replacement. The exclusive kit includes a 5 micron polypropylene Pentek DGD-5005-20 comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and all components you need to finish the job in one easy session. The Tier1 Pentek DGD-5005-20 Comparable 155358 Spun Polypropylene Filter Cartridge Replacement Kit reduces dirt, rust and corrosion while it captures sediment as small as 5 microns. The system installs quickly and easily, order today!
More Information
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-20-45-SEDIMENT
UPC 641945752359
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (length) x 4 1/4 inches (outside diameter)
Actual Size (cm) 50.8 x 10.795
Outside Diameter (inches) 4.25
Media Type Sediment Filter
Primary Filter Media Polypropylene
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 6 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 20
Flow Rate (lpm) 75.7082
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes DGD-5005-20 Pentek Replacement Filter, O-ring, and Lubricant

Reduced Contaminants

The TIER1_FHR_20_45_SEDIMENT_KIT reduces the following contaminants:

  • Dirt
  • Dust
  • Particulates
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation