Tier1 Pentek EP-BB 155548-43 Carbon Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant

SKU
TIER1_FHR_10_45_CARBON_KIT
Price $28.99

Availability: In stock

Price as configured $28.99

  • Ships fast!
  • Convenient refill kit offering includes filter, o-ring, and lubricant!
  • Reduces chlorine taste and captures sediment as small as 5 microns
  • Ensures you continue to serve great tasting, high quality water in your home or business!
See more product details
The 10 x 4.5 inch Tier1 Pentek EP-BB comparable Carbon Filter Cartridge Comparable Replacement Kit includes everything necessary for filter change maintenance. The exclusive kit includes a 5 micron carbon filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and all the components you need to finish the job in one easy session. Water taste and quality is critical business, the Tier1 Pentek EP-BB 155548-43 Carbon Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant reduces chlorine taste and odor and more while it captures sediment and particulates as small as 5 microns. The replacement kit installs quickly and easily, order today!
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-CARBON-KIT
UPC 641945752250
Advertised Size (in) 10 x 5
Actual Size (in) 9.5 inches (length) x 4.5 inches (outside diameter)
Actual Size (cm) 24.13 x 11.43
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 1,500
Filter Life (liters) 5,678.12
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 180
Operating Temperature (°C) 4.4 - 82.2
Flow Rate (gpm) 2
Flow Rate (lpm) 7.57
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes EP-BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Activated Carbon Block

Reduced Contaminants

The TIER1_FHR_10_45_CARBON_KIT reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Odor
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The TIER1_FHR_10_45_CARBON_KIT is comparable with the following part numbers

EP5-BB EP5-10BB
EP510BB EP-BB
PENTEK-155548 EV910805
CG5-104 4PCD1
155548-43

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  4. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
  5. Insert new filter cartridge.
  6. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  7. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.

Reset Instructions