Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Tier1 Pentek P5-20 Comparable 155014-43 Spun Polypropylene Filter Cartridge Replacement Kit with O-ring and Lubricant

Price $17.99 List Price Price $25.99 Save 30%
Availability: In Stock
  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Tier1 filters are big on performance, not on price
See more product details
The 20 x 2.5 inch Tier1 Pentek P5-20 Comparable 155014-43 Spun Polypropylene Filter Cartridge Replacement Kit includes everything necessary for no hassle filter maintenance. The exclusive kit includes a 5 micron polypropylene Pentek P5-20 Comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and all components you need to finish the job in one easy procedure. Water taste and quality is critical business, the Tier1 Pentek P5-20 Comparable 155014-43 Spun Polypropylene Filter Cartridge Replacement Kit reduces dirt, rust and corrosion while it captures sediment as small as 5 microns. The system installs quickly and easily, order today!
Package Qty3
Used In BrandsTier1
Manufacturer's IdFHR-20-25-SEDIMENT
Advertised Size (in)20 x 2-1/2
Actual Size (in)20 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm)50.8 x 6.35
Primary Filter MediaPolypropylene
Filter Life (months)6 months
Micron Rating (Nominal)5
Operating Temperature (°F)40 - 125
Operating Temperature (°C)4.4 - 51.7
Flow Rate (gpm)10
Flow Rate (lpm)37.8541
Warranty GuaranteeUnconditional Product Guarantee for Life of the Product
IncludesP5-20 Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter MediaPolypropylene

Reduced Contaminants

The TIER1_FHR_20_25_SEDIMENT_KIT reduces the following contaminants:

  • Dirt
  • Particulates
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt


  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions