Precision Series Tier1 Whole House Water Filtration System for Iron, Manganese and Hydrogen Sulfide Air Induction Oxidization Filter System
- No more bad taste or odor
- No Chemicals to buy, mix or add
- Simple, Fully Automatic regeneration with Air
- Utilizes aeration technology to effectively reduce sulfur from water
How are Manganese and Hydrogen Sulfide Reduced?
Once water is oxidized, Tier1's premium media blend acts as a catalyst for the removal of manganese. The Air Induction Oxidation promotes hydrogen sulfide (sulfur) reduction.
Tested and Certified!
Frequently Asked Questions
Is the air regeneration cycle noisy? The air regeneration cycle is distinguishable but not too loud.
What connections are needed for this filter? This system comes with 3/4 inch and 1 inch fitting connections.
Does this system have a manual bypass option? The Precision Series Tier1 whole house iron, manganese and hydrogen sulfide air induction oxidization filter system is an automatic bypass function but can be manually bypassed and regenerated. Instructions for how to program the valve head can be found in every owners manual with the product.
How long does the Regeneration Cycle take? Entire regeneration cycle will take 1 hour. 15 minutes for the backwash cycle and 45 minutes to replenish the compressed air.
How can I tell if my water needs iron treatment? Iron in your water can be observed by finding rust stains forming around areas of standing water, like toilets and drains, but ultimately the best way to find out is to test your water. Tier1 sells a wide array of water test kits like the 10 Panel Test Kit, that can be used to tell you if you may need to treat for iron. This test can also be used after you install a system to see the effectiveness of your filtration system.
|Primary Contaminants||Calcium, Manganese, and Magnesium|
|Used In Brands||Tier1|
|Actual Size (in)||58-1/4 inches (length) x 10 inches (outside diameter)|
|Actual Size (cm)||147.96 x 25.4|
|System Sizing||homes with 4 or more bathrooms|
|Media||Calcium Carbonate and Magnesium Oxide|
|Flow Rate (gpm)||5.8|
|Flow Rate (lpm)||21.96|
|Fitting Size (inches)||3/4 inch|
|Power Requirements||Standard 120v|
|Tank Dimensions||10 inches x 54 inches|
|Certifications||NSF/ANSI Standard 42|
|Warranty Guarantee||Tier1® Whole House Systems: Protect Every Drop Guarantee|
|Includes||10 inch x 54 inch pre-filled resin tank, control valve, power cord and 3/4 inch and 1 inch fittings|
The TIER1-WH-IRN-MG-SLFR-BW-1054 reduces the following contaminants:
- Hydrogen Sulfide
The TIER1-WH-IRN-MG-SLFR-BW-1054 fits the following model numbers