X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Tier1 10 inch x 2.5 inch Pleated Sediment Water Filter (30 Micron)

SKU
TIER1-SPC-25-1030
Price $8.99
Availability: In Stock
Fits standard 10 x 2.5 inch water filter housings
Choose a quantity
  • 1 Filter $8.99  
  • 3 Filters Price $6.79 each
  • 6 Filters Price $6.59 each
  • Ships fast
  • Holds more dirt than other filters
  • Washable and reusable filter
  • Can be used in a variety of applications such as commercial, residential, and industrial
See more product details
The Tier1 10 inch x 2.5 inch pleated sediment water filter (30 Micron) offers a pleated design that captures more dirt, and particles keeping your water clean and drinkable. Designed for applications such as residential, commercial and industrial environments this filter is resistant to bacteria and chemicals while also reducing different kinds of sediment. You can even wash and re-use this filter for better use. Be sure to order today!
Package Qty 1
Used In Brands Hydronix, Pentek, Tier1
Manufacturer's Id SPC-25-1030
UPC 799705708358
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Media Non-Woven Pleated Polyester
Primary Filter Media Pleated Polyester
Filter Life (months) 6 months
Micron Rating (Nominal) 30
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Color White
Materials of Construction Core: Polypropylene, End Caps: Vinyl Plastisol
Warranty Guarantee Unconditional Guarantee for Life of the Product
Primary Filter Media Pleated Polyester

Reduced Contaminants

The TIER1-SPC-25-1030 reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt

The TIER1-SPC-25-1030 is comparable with the following part numbers

PENTEK-R30

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions