5 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (1 micron)

The Tier1 P1-5-WF Sediment Depth Filter is a 1 micron filter. The Tier1 P1-5-WF Sediment Water Filter measures 4-7/8-inch x 2-1/2-inch. The Polypropylene Prefilter has graded density for higher dirt-holding capacity. Tier1 P1-5-WF cartridges are made of 100% pure polypropylene. Tier1 Sediment Depth Cartridges are perfect prefilters for drinking water systems, Reverse Osmosis Systems, ice machines, and more. The Tier1 P1-5-WF is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only. The Tier1 P1-5-WF removes sediment, dirt, sand, and silt for cleaner, filtered water. UPC 689466299748.

Reduces the following contaminants:

• Dirt
• Sand
• Sediment
• Silt

• Tier1 P1-5-WF Sediment Water Cartridge Specs:
• Dimensions: 4-7/8" L x 2-1/2ï¾” W
• Inside Diameter: 1.1ï¾”
• Initial Pressure Change @ Flow: 0.3 psi @ 2 gpm
• Temperature Range: 40 F TO 145 F (4.4 C TO 62.8 C)
• Filter Media: Polypropylene
• Maximum Pressure Drop: 69°F (20°C) 46.4 psi (3.2 kg/cm²)
• Recommended Replaceable Pressure Drop: 21.75 psi (1.5 kg/cm²)

• The Tier1 P1-5-WF Sediment Filter is a compatible replacement for:
• Liquatec: SDF-25-0501 Water Filter
• Watts FPMB1-5 Water Filter
• Hydronix SDC-25-0501 Water Filter

Instructions

1. 1. The Tier1 P1-5-WF should be replaced approximately every 2 months depending on your water quality and usage
2. 2. The Tier1 P1-5-WF filter can be used in the US-316 water filtration housing or in any housing that will hold a 5-inch x 4-7/8-inch filter