Tier1 P50-40 Sediment Water Filters (1 Case / 20 Filters)

SKU
TIER1_P50_40_20_PACK
Price $151.99

Availability: In stock

Price as configured $151.99

The Tier1 P50-40-WF Sediment Depth Filter is a 50 micron filter. The Tier1 P50-40-WF Sediment Water Filter measures 40-inch x 2-1/2-inch. The Tier1 P50-40-WF Polypropylene Prefilter has graded density for higher dirt-holding capacity. Tier1 P50-40-WF water filter cartridges are made of 100% pure polypropylene. These are perfect prefilters for drinking water systems, Reverse Osmosis Systems, ice machines, and more. The Tier1 P50-40-WF is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only. The Tier1 P50-40-WF depth water filter removes dirt, particulate, sediment, sand, and silt for improved filtered water. The Tier1 P50-40-WF filter should be replaced approximately every 3 months depending on your water quality and usage. UPC 689466299946.
Package Qty 20
Advertised Size (in) 40 x 2-1/2
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 3 months
Micron Rating (Nominal) 50
Flow Rate (gpm) 20
Flow Rate (lpm) 75.71
Warranty Guarantee Unconditional Product Guarantee for Life of the Product

Instructions

  1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump. If there is any damage to the o-ring, replace it
  2. After cleaning the o-ring, apply silicone lubricant, like OR-LUBRICANT-SM
  3. You must use a silicone food grade lubricant. All other types of lubricant could damage the o-ring. Silicone Lubricant prevents leaking and extends the life of the o-ring

Reset Instructions