Whirlpool 8171413 Refrigerator Water Filter

The Whirlpool 8171413 Refrigerator Water Filter fits Whirlpool, KitchenAid, and Kenmore refrigerators with a round plastic filter located inside the refrigerator compartment. The filter uses Activated Carbon Block to remove contaminants for up to 6 months. Consider upgrading to the Whirlpool EveryDrop EDR8D1 filter for increased contaminant reduction. Order today!

• Genuine OEM Product

Reduces the following contaminants:

• 99.00% of Chlorine Taste & Odor
• The 8171413 does not reduce fluoride
• Particulates

Used In Brands	Amana, Jenn-Air, Kenmore, KitchenAid, Maytag, Whirlpool
Manufacturer's Id	8171413
UPC	050946800608
Actual Size (in)	5 3/4 inches (length) x 3 1/2 inches (outside diameter)
Actual Size (cm)	14.61 x 8.89
Media	Carbon Block
Primary Filter Media	Activated Carbon Block
Filter Life (gallons)	200
Filter Life (liters)	757.08
Filter Life (months)	6 months
Operating Pressure (psi)	30 - 120
Operating Temperature (°F)	33 - 100
Operating Temperature (°C)	0.6 - 37.8
Flow Rate (gpm)	0.5
Flow Rate (lpm)	1.893

The 8171413 is also known by the following part numbers:

• 8171413, WF286, 04609002000, 2204324, 2204326, 2206039, 2206048, 2213384, 8171413P, 8171413R, 8171413T, FILTER8, NL200, PS390643, WF-286, WFI-NL200

Instructions

1. 1. Twist the old filter a quarter-turn counterclockwise
2. 2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. 3. Push the new filter up into the fridge until it stops
4. 4. Twist the filter a quarter-turn clockwise
5. 5. Reset your 'change filter' light (if your fridge has one)

Resetting Your Filter Change Indicator