10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron) - WaterFilters.NET

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Tier1

TIER1-AP110-934

10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)

Backordered

$5.49

Price Per Item

2 PACK	$5.32
4 PACK	$5.16
6 PACK	$4.99
24 PACK	$4.83

Choose a Pack Size for Your Volume Discount:

Single

2 PACK

4 PACK

6 PACK

24 PACK

Bonded Polypropylene filter media
Brings you cleaner water along with an easy installation
30 day 100% satisfaction guarantee
Fits many common housings with a 10 inch by 2.5 inch size

Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: AP110-934

UPC: 700355940777

Actual Size (in): 9 7/8 inches (length) x 2 7/16 inches (outside diameter)

Media: Spun Wound Grooved Polypropylene

Primary Filter Media: Polypropylene

Operating Temperature (°F): 40 - 100

Operating Temperature (°C): 4.4 - 37.8

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Brand: Tier1

Advertised Size: 10 x 2-1/2

Depth (in): 2.44 in

Length (in): 9.88 in

Outside Diameter (in): 2.44 in

Width (in): 2.44 in

Media Type: Sediment Filter

UPC's For Search: 700355940777 | 16145157363 | 161451103655 | 161451573632 | 16145110016 | 161451408125

Country of Origin: China

Micron Rating Nominal: 5

Flow Rate (gpm): 8.0

Instructions

Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Contaminants Reduced

Oxidized Iron

Particles

Rust and Corrosion

Sediment

Filter Life

Filter Life (months): 6 months

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Product Details

The AP-110 comparable water filter by Tier1 is ideal for 10 x 2.5-inch residential applications that require a sediment filter for the reduction of sediment, dirt, rust, and corrosion. Bonded Polypropylene filter media headlines this 5-micron sediment filter that will meet your filtering challenges head-on. Order today!

Comparable Part Number

TIER1-AP110-934 is comparable with the following part number(s)

Compatible With

10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)

TIER1-AP110-934 is comparable with the following part number(s)

TIER1-AP110-934 fits the following model number(s)

Customer also purchased