10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron) - WaterFilters.NET

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Tier1

TIER1-P1-10

10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron)

Name: 10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron)
Brand: Tier1
SKU: TIER1-P1-10
Price: 4.1 USD
Availability: InStock

High Stock (311)

.price-ui--loading { display: block !important; opacity: 1 !important; }

$4.10 - $86.59

Price Per Item

2 PACK	$3.97
4 PACK	$3.85
6 PACK	$3.73
24 PACK	$3.60

Choose a Pack Size for Your Volume Discount:

Single

2 PACK

4 PACK

6 PACK

24 PACK

Qty

Bonded Polypropylene filter media
Brings you cleaner water along with an easy installation
30 day 100% satisfaction guarantee
Fits many common 10 x 2.5-inch housings

Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: P1-10

UPC: 799932614644

Actual Size (in): 9-3/4 inches (length) x 2-1/2 inches (outside diameter)

Media: Melt Blown Polypropylene

Primary Filter Media: Polypropylene

Operating Temperature (°F): 40 - 145

Operating Temperature (°C): 4.4 - 62.8

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Brand: Tier1

Advertised Size: 10 x 2-1/2

Length (in): 9.75 in

Outside Diameter (in): 2.5 in

Media Type: Sediment Filter

Country of Origin: China

Micron Rating Nominal: 1

Flow Rate (gpm): 5.0

Instructions

Turn off water supply. Press red pressure-relief button (if present).
Unscrew housing. Remove large o-ring, wipe clean and set aside.
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
Insert new filter cartridge.
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.

Contaminants Reduced

Particulates

Sediment

Filter Life

Filter Life (months): 3 months

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Check Our Comparable Products

Product Details

The Pentek P1 comparable filter by Tier1 is an ideal solution for a variety of filtration applications. The Tier P1-10 Bonded Polypropylene filter effectively reduces sediment and fine dirt down to 1 micron. Don't let impurities plague your water. Confront your filtration challenges head on; order today!

Comparable Part Number

	10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron)	Purtrex PX01-9-78 Replacement Filter Cartridge	3M Aqua-Pure AP1001 Whole House Filter (2-Pack)	1 Micron Melt Blown Sediment Filter by USWF 10"x2.5"
Product Price	$4.10	$7.69	$103.65	$3.73
Product SKU	TIER1-P1-10	PURTREX-PX01-9-78	AQUAPURE-AP1001	USWF-MB1-1025
Filter Life (months)	3 months	3 months	6 months	3 months
Primary Filter Media	Polypropylene	Polypropylene	Polypropylene	Meltblown Polypropylene
Micron Rating (Nominal)	1	1	1	1
Actual Size (in)	9-3/4 inches (length) x 2-1/2 inches (outside diameter)	9-7/8 inches (length) x 2-1/2 inches (outside diameter)	9 3/4 inches (length) x 2 1/2 inches (outside diameter)	9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Country of Manufacture	China	United States	United States	United States

10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron)

TIER1-P1-10 is comparable with the following part number(s)

Customer also purchased