Culligan D-30A Under Sink Replacement Water Filter
$38.99
The Culligan D-30A carbon block water filter is a 0.5 micron extra fine sediment water filter
The Culligan D-30A replacement filter removes greater than 99.95% of Cryptosporidium and Giardia cysts
The Culligan D-30A water filter reduces bad taste and odor, sediment, and asbestos
format_list_bulletedFeatures & Specs
Package Qty: 1
Manufacturer: Culligan
Manufacturer's Id: D-30A
UPC: 033663005112
Actual Size (in): 9 3/4 inches (length) x 2 1/2 inches (outside diameter)
Media: Carbon Block
Primary Filter Media: Carbon Block
Brand: Culligan
Advertised Size: 10 x 2-1/2
Length (in): 9.75 in
Outside Diameter (in): 2.5 in
Media Type: Carbon Filter
UPC's For Search: 10033663005119 | 033663005112
Micron Rating Nominal: 0⋅5
Netsuite Item Type: Under Sink Filters
descriptionInstructions
The Culligan D-30A under sink water filter life is up to 12 months or 1000 gallons (depending on the quality of your water)
The Culligan D-30A should be installed with the end of the filter with the hole facing up
If no water is passing through the system, the filter is likely installed upside down
If the flow restriction in the Culligan D-30A is too great, you can increase the flow rate by drilling a larger hole where the existing hole is, with a 1/8-inch drill bit
filter_altFilter Life
Filter Life (gallons): 12 months
warning
Prop65 warning applies to products that contain carbon media. Click here for more details
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
The Culligan D-30A water filter reduces extra fine dirt, sand, sediment, silt, rust particles, and turbidity. The Culligan D-30A water filter cartridge fits in undersink water filter systems. The Culligan D-30A water filter is tested and certified by NSF International to NSF/ANSI Standard 42/53 in model US-600A and US-600 which means that the Culligan D-30A replacement filter has passed rigorous testing standards. The Culligan D-30A is recommended for use with city and well water supplies.
Note: Culligan has changed the model number of this filter from D-30 to D-30A due to a design change. The contaminant reduction remains the same. The D-30A has a flow restrictor which will reduce the flow rate more than the original D-30. The original D-30 is no longer being manufactured.
CULLIGAN-D-30 is comparable with the following part number(s)