Warranty Info
Warranty Info
Warranty Guarantee: Five (5) Year Limited Warranty. See Precision Series Warranty for more information.
TIER1-WH-CB-BW-1054
Precision Series Tier1 Whole House Water Filtration System for Chlorine, Taste & Odor Reduction for 4 - 6 Bathrooms
Out of Stock
$781.88
Fits most standard 3/4-inch an 1-inch water lines
Features & Specs
Features & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: WH-CB-BW-1054
UPC: 810004472969
Actual Size (in): 58-1/2 inches length) by 10 inches (outside diameter)
Primary Filter Media: Granular Activated Carbon
Warranty Guarantee: Five (5) Year Limited Warranty. See Precision Series Warranty for more information.
Brand: Tier1
Fitting Size (in): 34 in
Length (in): 58.25 in
Outside Diameter (in): 10 in
Reduction Class: Chloramine|Chlorine|Taste and Odor
Power Requirements: Standard 120v
Tank Dimensions: 10 inches x 54 inches
UPC's For Search: 810004472969
Flow Rate (gpm): 7.2
Includes: 10 inch x 54 inch pre-filled resin tank, control valve, power cord and 3/4 inch and 1 inch fittings
Certifications
Certifications
Contaminants Reduced
Contaminants Reduced
Warranty Info
Warranty Info
Warranty Guarantee: Five (5) Year Limited Warranty. See Precision Series Warranty for more information.
Prop65 warning applies to products that contain carbon media. Click here for more details
Prop65 warning applies to products that contain carbon media. Click here for more details
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
The Precision Series Whole Home Backwashing Carbon Filter System is the ideal solution for clean, clear and odor free water for every room in your house. The WH-CB-BW-1054 system is designed for families of 1-6 people based on average water demand per person. The system is simple to install and operate creating a hassle free way to monitor and purify your water. Manufactured to reduce chlorine taste, odor, rust, corrosion, sand, sediment, silt and turbidity, the Tier1 Precision Series Whole Home Backwashing Carbon Filter System is ready to protect every drop. This system has a service life of between 5 and 7 years. For optimal performance it is suggested to replace the system after this period of time has passed.
How Back Washing Filters Work
Backwashing is a process that reverses the flow of water to rinse and resettle the media of the tank to prevent channeling, retain the effectiveness of the media, and remove trapped contaminants. To begin the backwash process, water flow is reversed and sent down the riser tube which normally carries the filtered water out of the tank. The water entering the media tank actually lifts the media bed, swirling it and lifting contaminants trapped in the media upward, this water is then funneled out the drain line. This process of cleansing the filter media usually lasts for around 10 minutes. Following the backwash phase there is a rinse cycle which replicates the normal flow of water through the media, this rinses the media again and allows it to settle into its serviceable position. With the media resettled and cleansed, water filtration may resume.
"Channeling" Inefficiencies
Channeling is a process caused by a liquids natural tendency to follow the path of least resistance. Over time water will find a path it can flow the fastest through and will carve a path or channel following its flow. This process causes a lowered system effectiveness because water will begin to flow around the filter media instead of flowing through it as intended. To fight this process and remove suspended contaminants a backwash and rinse cycle will mix up the media and then resettle it, counteracting the channeling process and providing maximum contact between the water and filtering media.
TIER1-WH-CB-BW-1054 fits the following model number(s)
- WH-CB-BW-1054