Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1_FHR_10_45_PLEATED_KIT
Tier1 Pentek R30-BB 155101-43 Pleated Polyester Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant (4.5 inches x 9-3/4 inches, 30 Micron)
High Stock (24)
$19.32
Features & Specs
Features & Specs
Manufacturer: Tier1
Manufacturer's Id: FHR-10-45-PLEATED
UPC: 641945752281
Actual Size (in): 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Primary Filter Media: Pleated Polyester
Operating Temperature (°F): 40 - 125
Operating Temperature (°C): 4.4 - 51.7
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 10 x 4-1/2
Depth (in): 4.5 in
Length (in): 9.75 in
Outside Diameter (in): 4.5 in
Width (in): 4.5 in
Media Type: Sediment Filter
Micron Rating Nominal: 30
Flow Rate (gpm): 10.0
Includes: R30BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Instructions
Instructions- Turn off water supply. Press red pressure-relief button (if present)
- Discard used filter cartridge
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Insert new filter cartridge
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
Contaminants Reduced
Contaminants Reduced
Filter Life
Filter Life
Filter Life (months): 6 months
Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
The 10 x 4.5 inch Tier1 Pentek R30-BB 155101-43 Pleated Polyester Filter Cartridge Comparable Replacement Kit includes everything necessary for no hassle filter change maintenance. The exclusive kit includes a 30 micron pleated polyester Pentek R30BB comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and all components you need to finish the job in one easy procedure. Water taste and quality is critical business, the Tier1 Pentek R30-BB 155101-43 Pleated Polyester Filter Cartridge Comparable Replacement Kit captures dirt, sand and sediment down to 30 microns. The system installs quickly and easily, order today!
 | |
|---|---|
Product Price |
$19.32
|
Product SKU |
TIER1_FHR_10_45_PLEATED_KIT
|
Filter Life (months) |
|
Primary Filter Media |
|
Micron Rating (Nominal) |
|
Actual Size (in) |
|