Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1-S1-BB
10 X 4.5 Pleated Cellulose Replacement Filter by Tier1 (20 micron)
High Stock (51)
$9.75 - $205.92
| Price Per Item | |
|---|---|
| 2 PACK | $9.46 |
| 4 PACK | $9.16 |
| 6 PACK | $8.87 |
| 24 PACK | $8.58 |
Features & Specs
Features & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: S1-BB
UPC: 700355941200
Actual Size (in): 10 inches (length) x 4 1/2 inches (outside diameter)
Media: Resin Impregnated Pleated Cellulose
Primary Filter Media: Pleated Cellulose
Operating Temperature (°F): 40 - 145
Operating Temperature (°C): 4.4 - 62.8
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 10 x 4-1/2
Depth (in): 4.23 in
Length (in): 9.98 in
Outside Diameter (in): 4.5 in
Width (in): 4.23 in
Media Type: Sediment Filter
UPC's For Search: 700355941200
Country of Origin: China
Micron Rating Nominal: 20
Flow Rate (gpm): 10.0
Instructions
Instructions- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth.
- Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
Contaminants Reduced
Contaminants Reduced
Filter Life
Filter Life
Filter Life (months): 6 months
Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
The Pentek S1-BB comparable by Tier1 is a 10 x 4.5-inch whole-house sediment water filter for municipal water system applications that require the reduction of rust, silt, dirt, scale, and sand. Carbon Resin Impregnated Pleated Cellulose filter media headlines this 20-micron sediment filter that will meet your filtering challenges head-on. Order today!
TIER1-S1-BB is comparable with the following part number(s)
- 155405-43
- 155405-51
- PC20-BB-S
- S1-BB
- W20CLHD
- PENTEK-S1-BB
- TIER1-S1-BB
 |  |  |  | |
|---|---|---|---|---|
Product Price |
$9.75 |
$26.88 |
$22.93 |
$21.69 |
Product SKU |
TIER1-S1-BB
|
AMERICAN-PLUMBER-W20CLHD
|
PENTEK-ECP20-BB
|
PENTEK-S1-BB
|
Filter Life (months) |
|
|
|
|
Primary Filter Media |
|
|
|
|
Micron Rating (Nominal) |
|
|
|
|
Actual Size (in) |
|
|
|
|
Country of Manufacture |
|
|
|
|