We use cookies to make your experience better.
10 X 4.5 Granular Activated Carbon Replacement Filter by Tier1 (25 micron)
SKU
TIER1-RFC20-934
Price $26.99 List Price Price $38.99 Save 30%
Availability: In Stock
Fits most stand housings built for 10-inch x 4.5 inch filter cartridges
Choose a quantity
1 filter $26.99 3 filters $24.45 each 6 filters $23.39 each
- Ships fast!
- Ideal for under sink or point-of-use filtration
- Drop-in cartridge makes filter change fast and easy
- Easy installation and filter exchanges within minutes
› See more product details
- Ships fast!
- Ideal for under sink or point-of-use filtration
- Drop-in cartridge makes filter change fast and easy
- Easy installation and filter exchanges within minutes
The Culligan RFC-BBS-D comparable by Tier1 is a 10 x 4.5 inch whole house radial flow carbon water filter for point-of-entry residential applications that require reduction of sand, hard scale, rust and corrosion, dirt, chlorine, bad taste and odor. Granular Activated Carbon filter media headlines this 25 micron radial flow filter that will meet your filtering needs head on. Order today!
The 10 X 4.5 granular activated carbon replacement filter by Tier1 is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 4.5 inch filters. The RFC20-934 goes to work immediately providing cleaner, fresher water for up to 3 months. Enjoy cleaner better water with your whole house replacement filter today.
Carbon filter media is extremely effective at improving water quality by reducing unpleasant chlorine taste and odor from your water. Capable of reducing both larger solid contaminants and chlorine taste, carbon filters are the go-to for many drinking water systems. Enjoy a refreshing glass of water with a carbon filter today.
Reduced Contaminants
The TIER1-RFC20-934 reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Dirt
- Hard Scale
- Oxidized Iron
- Particles
- Particles that can carry Odor
- Rust and Corrosion
- Sand
The TIER1-RFC20-934 is comparable with the following part numbers
Culligan RFC-BBS-D | 48169 | 155141 | 1020705 |
10 inch Big Blue Housings | 155141-27 | 155141-30 | 155141-43 |
155141-51 | American Plumber 155141 | American Plumber W10-PR | American Plumber W15-PR |
American Plumber WRC25HD | Ametek RFC-BB | Ametek RFC-BBS | Bruner RFC-BBS |
GE FXHSC | GE FXHTC | GE GXWH30C | GE GXWH35F |
HD-950 | Kleen Plus RFC-BBS | OmniFilter BF6 | OmniFilter BF7 |
OmniFilter T06 | Pentair RFC-BBS | Pentek 155141-43 | Pentek RFC-BB |
Pentek RFC-BBS | Plymouth RFC-BBS | RFC-BB | RFC-BBS |
RFC-BBSA | RFC-BBSA-D | RFC-BBS-D | TO8 |
TO8-2-01 | TO8-2-02 | TO8-2-05 | TO8-R-05 |
US Filter RFC-BB | US Filter RFC-BBS | W5CBHD | WRC25HD |
RB-RFC-BB | TIER1-RFC20-934 |
The TIER1-RFC20-934 fits the following model numbers
AQUAPURE-AP101T |
WHIRLPOOL-WHKF-DWHBB |
Instructions
- Turn off water supply. Press red pressure-relief button (if present)
- Unscrew housing. Remove large o-ring, wipe clean and set aside
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Insert new filter cartridge
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation