X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

GAC-P117 Comparable Whole House Replacement Water Filter by Tier1

SKU
TIER1-GAC-P117
Price $13.99 List Price Price $19.99 Save 30%
Availability: In Stock
Fits most whole house water filter systems that uses standard 10 x 2-1/2 filter cartridges The solid core of the filter may inhibit it from fitting in some housing caps and sump posts.
Choose a quantity
  • 1Filter$13.99 
  • 3Filters Price $13.16 each
  • 6Filters Price $12.59 each
  • Ships fast!
  • Big on quality, not on price
  • Reduces chlorine taste and odor
  • Universally sized for a variety of systems
› See more product details
  • Ships fast!
  • Big on quality, not on price
  • Reduces chlorine taste and odor
  • Universally sized for a variety of systems
The AP117 comparable granular activated carbon filter by Tier1 is manufactured for use with many national brand whole house water filtration systems that use standard 10 inches by 2-1/2 inch water filters. Whether you are a first-time customer or a veteran user, Tier1 filters are built for performance and backed by an Unconditional Product Guarantee for Life of the Product.
Package Qty1
Manufacturer's IdGAC-P117
UPC635510449980
Advertised Size (in)10 x 2-1/2
Actual Size (in)10 inches (length) x 2 3/4 inches (outside diameter)
Filter Life (gallons)10,000
Filter Life (liters)37,854.12
Filter Life (months)6 months
Micron Rating (Nominal)5
Flow Rate (gpm)3
Flow Rate (lpm)11.356
Warranty GuaranteeUnconditional Product Guarantee for Life of the Product

Reduced Contaminants

The TIER1-GAC-P117 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Sand

Instructions

  1. Turn off the water supply. Press the red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean, and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  4. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in the groove.
    NOTE: this step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
  5. Insert the new filter cartridge.
  6. Screw housing onto the cap and hand-tighten. do not overtighten. Make sure cap standpipe slips into cartridge.
  7. Turn on the water supply. Press the pressure-relief button (if present). check for leaks before leaving installation.