GE MWF/MWFP SmartWater Water Filter Replacement Cartridge

GE has recently upgraded its MWF refrigerator water filter to help reduce up to 94% of common pharmaceuticals, in addition to common contaminants such as chlorine and lead, from your drinking water. The new and improved GE MWFP SmartWater water filter replacement cartridge is a genuine, made in the USA, OEM part that will fit the same models as its predecessor. And like its predecessor, this new cartridge will provide the coolest and cleanest tasting water and ice for up to 6 months after easy installation. Order by 4pm CST on any business day for same day shipping. Packaging label matches the previous version of this filter. Genuine OE part made in USA. Reduces up to five common pharmaceuticals. Tested and certified for ANSI/NSF Standards 42 & 53.

• Made in the U.S.A.
• Genuine OEM Product

Reduces the following contaminants:

• 98% of 2,4-Dichlorophenoxyacetic Acid (2,4-D)
• 99% of Alachlor
• 99% of Asbestos
• 94% of Atrazine
• 96% of Benzene
• 98% of Carbofuran
• 96% of Chlorine Taste & Odor
• 99.99% of Cysts
• The MWFP does not reduce fluoride
• 99% of Lead
• 99% of Lindane
• 93% of Mercury
• 99% of P-Dichlorobenzene
• 99.10% of Particulates (Class I)
• 94% of Pharmaceuticals
• 93% of Toxaphene
• 98% of Turbidity

Used In Brands	GE, Hotpoint
Manufacturer's Id	MWFP
UPC	084691260233
Primary Filter Media	Activated Carbon Block
Filter Life (gallons)	300
Filter Life (liters)	1,135.62
Filter Life (months)	6 months
Micron Rating (Nominal)	0.5
Operating Pressure (psi)	40 - 120
Operating Temperature (°F)	33 - 100
Operating Temperature (°C)	0.6 - 37.8
Flow Rate (gpm)	0.5
Flow Rate (lpm)	1.90
Certifications	NSF/ANSI Standard 42, NSF/ANSI Standard 53

The MWFP is comparable with the following part numbers:

Instructions

1. 1. Twist the old filter a half-turn counterclockwise
2. 2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. 3. Fill the new filter with water (you can use the cold water faucet on your kitchen sink)
4. 4. Push the new filter up into the fridge until it stops
5. 5. Twist the filter a half-turn clockwise
6. 6. Reset your 'change filter' light (if your fridge has one)

Resetting Your Filter Change Indicator