We use cookies to make your experience better.
Hydronix SDC-45-2001 Sediment Polypropylene Water Filter Cartridges
SKU
HYDRONIX-SDC-45-2001
Price $23.99 List Price Price $33.99 Save 29%
Availability: In Stock
Choose a quantity
1 Filter $23.99 -
3 Filters Price $22.57 each -
6 Filters Price $21.59 each
- The Hydronix SDC-45-2001 is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only.
- The Hydronix SDC-45-2001 depth filter removes sediment, dirt, sand, and silt for cleaner, filtered water.
- See Hydronix SDC Series Data Sheet
The Hydronix SDC-45-2001 Sediment Depth Cartridge is a 1 micron sediment filter. The Hydronix SDC-45-2001 Sediment Water Filter measures 20-inch x 4-1/2-inch. The Hydronix SDC-45-2001 Prefilter has graded density for higher dirt-holding capacity. Hydronix Water Technology SDC-45-2001 water filter cartridges are made of 100% pure polypropylene. Hydronix SDC Sediment Depth Cartridges are perfect prefilters for GAC filters, RO systems, DI Systems, ice machines, wineries, and many more.
| Package Qty | 1 |
|---|---|
| Used In Brands | Hydronix, Liquatec, Pentek, Watts |
| Manufacturer's Id | SDC-45-2001 |
| UPC | 799705708259 |
| Advertised Size (in) | 20 x 4-1/2 |
| Actual Size (in) | 20 inches (length) x 4.5 inches (outside diameter) |
| Actual Size (cm) | 50.8 x 11.43 |
| Media | Spun Wound Polypropylene |
| Primary Filter Media | Polypropylene |
| Filter Life (months) | 6 months |
| Micron Rating (Nominal) | 1 |
| Operating Temperature (°F) | 40 - 145 |
| Operating Temperature (°C) | 4.4 - 62.8 |
| Flow Rate (gpm) | 20.00 |
| Flow Rate (lpm) | 75.71 |
| Additional Information | Recommended Replaceable Pressure Drop: 21.75 PSI (1.5 kg/cm2), Maximum Pressure Drop: 69 F (20 C) 46.4 psi (3.2 kg/cm2), Initial Pressure Change at Flow: 1 psi at 20 gpm |
Reduced Contaminants
The HYDRONIX-SDC-45-2001 is comparable with the following part numbers
| 155360-43 | DGD-2501-20 | ||
| FPMB-BB1-20 | P1-20BB | ||
| SDC-45-2001 | SDF-45-2001 |
Instructions
- Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump
- If there is any damage to the o-ring replace it
- After cleaning the o-ring apply a silicone lubricant, like OR-LUBRICANT-SM (purchasable separately)
- You must use a silicone food grade lubricant--all other types of lubricant could damage the o-ring
- Silicone lubricant prevents leaking and extends the life of the o-ring
Reset Instructions
Related Products
20 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (1 micron)
Price $21.99 List Price Price $30.99 Save 29%
Pentek DGD-2501-20 Sediment Water Filters (20-inch x 4.5-inch)
Price $31.99 List Price Price $45.70 Save 30%
20-BB 1-Inch Whole House Water Filter System
Price $50.99 List Price Price $72.84 Save 29%
O-Ring Silicone Grease (0.2 oz Packet)
Price $4.99 List Price Price $6.99 Save 28%
Dow Corning Molykote 111 O-Ring Silicone Lubricant (5.3 oz. Tube)
Price $20.99 List Price Price $29.99 Save 30%
