Inline Granular Activated Carbon Water Filter 1/4-inch FNPT Fittings by Tier1 (5 micron)

SKU
TIER1-IN-WF0150
Price $7.99
Availability: In stock
Choose a quantity
  • 1 Filter $7.99  
  • 3 Filters Price $7.69 each
  • 6 Filters Price $7.39 each
  • Ships fast!
  • Installs quickly and easily
  • Tier1 water filters are big on quality, not on price
  • A Granular Activated Carbon Water Filter with 1/4-inch FNPT Fittings
See more product details
The Inline Granular Activated Carbon Filter 1/4-inch FNPT Fittings by Tier1 (5 micron) provides great tasting drinking water and ice wherever you need it. Manufactured to reduce taste, odor, sediment, and chlorine taste from your water. Pair the Inline Granular Activated Carbon Water Filter by Tier1 with beverage equipment, reverse osmosis systems, drinking fountains, water coolers, ice machines, refrigerators, coffee makers and other point-of-use applications. Two 1/4-inch compression fittings are needed, one for each end. The 1/4-inch fittings are sold separately or use your current 1/4-inch fittings. Order the Inline Granular Activated Carbon Water Filter 1/4-inch FNPT Fittings by Tier1 (5 micron) today!
Package Qty 1
Manufacturer's Id IN-WF0150
UPC 635510408451
Advertised Size (in) 10 x 2
Actual Size (in) 10 inches (length) x 2 inches (width) x 2 inches (height)
Media Coconut Shell Granular Activated Carbon
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 2,000
Filter Life (liters) 7,570.82
Filter Life (months) 12 months
Micron Rating (Nominal) 5
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 3.3 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.89
Fitting Type FNPT
Fitting Size (inches) 1/4 inch
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Granular Activated Carbon

Reduced Contaminants

The TIER1-IN-WF0150 reduces the following contaminants:

  • Chlorine Taste & Odor
  • Particulates
  • Sediment

The TIER1-IN-WF0150 is comparable with the following part numbers

TIER1-IN-WF0150
WF0150

Instructions

  1. Tier1 IN-WF0150 inline filters should be installed on cold water lines only
  2. Tier1 IN-WF0150 water filters should not be used where water is microbiologically unsafe
  3. Cartridges will contain a very small amount of carbon fines. After installation, cartridges should be flushed with sufficient water to remove all traces of fines from your water system before use
  4. It is recommended that you run the tap for at least 10 seconds prior to using the water (this is particularly important if the tap water has not been used daily)
  5. The filter must be protected against freezing. Failure to do so may result in cracking of the filter and water leakage

Reset Instructions