Omnipure Q5615 Carbon Block Q-Series Water Filter

SKU
OMNIPURE-Q5615
Price $31.79
Availability: In stock
Choose a quantity
  • 1 Filter $31.79  
  • 3 Filters Price $29.09 each
  • 6 Filters Price $28.09 each
The Omnipure Q5615 is a 1 micron Carbon Block Lead Reduction Water Filter. The Omnipure Q5615 Carbon Block Lead water filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5615 filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5615 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5615 can be used as a pre or postfilter for Reverse Osmosis Systems, beverage equipment, drinking water fountains, ice machines, and other point-of-use applications. The Omnipure Q5615 GAC lead water filter is a granular activated carbon block filter used to reduce cysts, lead, taste, odor and chlorine taste and odor.
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id Q5615
UPC 799932588846
Advertised Size (in) 12 x 2-1/2
Media Block GAC with Lead Specific Media
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 1,500
Filter Life (liters) 5,678.12
Filter Life (months) 12 months
Micron Rating (Nominal) 1
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893

Contaminants

Reduces the following contaminants:

  • Cysts
  • Lead

The OMNIPURE-Q5615 is comparable with the following part numbers

Q5615
Q5615P
Q5615-P

Instructions

  1. Omnipure Q5615 water filters should be installed on cold water lines only
  2. Omnipure Q5615 water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head

Reset Instructions