X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Omnipure Q5640 Coconut Carbon GAC Water Filters

SKU
OMNIPURE-Q5640
Price $22.99 List Price Price $32.99 Save 30%
Availability: BackOrder
Choose a quantity
  • 1Filter$22.99 
  • 3Filters Price $21.63 each
  • 6Filters Price $20.69 each
The Omnipure Q5640 acid washed coconut GAC filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5640 filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5640 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5640 Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, undersink systems, and reverse osmosis systems. The Omnipure Q5640 GAC water filter is a coconut shell granular activated carbon filter used to reduce taste, odor and chlorine taste and odor.
Package Qty1
Used In BrandsOmnipure
Manufacturer's IdQ5640
UPC799932588938
Advertised Size (in)12 x 2-1/2
Mesh Size12 x 40
MediaAcid Washed GAC Mesh
Primary Filter MediaGranular Activated Carbon
Filter Life (gallons)2,500
Filter Life (liters)9,463.53
Filter Life (months)12 months
Maximum Operating Pressure (psi)125
Operating Temperature (°F)35 - 100
Operating Temperature (°C)1.7 - 37.8
Flow Rate (gpm)0.5
Flow Rate (lpm)1.893
Additional InformationVolume: 35.5 Cu. In., Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head

Reduced Contaminants

The OMNIPURE-Q5640 reduces the following contaminants:

  • Chlorine Taste & Odor 95.00%

The OMNIPURE-Q5640 is comparable with the following part numbers

Q5633
Q5640

Instructions

  1. Omnipure Q5640 water filters should be installed on cold water lines only
  2. Omnipure Q5640 water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head
  8. Inspect this o-ring for any signs of damage, and replace as needed