Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • How to Install Whirlpool 4396710 & 4396841 In Grille Fridge Filter Video

    Welcome to the How to Install Whirlpool 4396710 & 4396841 In Grille Fridge Filter Video Page.

    The Whirlpool 4396710 & 4396841 fridge filters are nearly identical. The 4396710 removes more contaminants. They both produce cleaner, better tasting drinking & cooking water, and have an approximate filter life of 6 months. The Whirlpool 4396710 & 4396841 are designed to be installed in the base grille of a variety of refrigerators with a push button release. 

    How to Install Whirlpool 4396710 & 4396841 In Grille Fridge Filter Video Transcript:

    Locate the water filter cartridge cap in the front base grill. Remove the filter by pressing and holding down the eject button while pulling straight out on the filter cap. Remove the filter cartridge cap by turning it counter-clock wise until it stops and the ridges align.
    Then pull the cap straight off the end of the cartridge. Set aside the filter cap and do not discard. Remove the new filter from any packaging. Remove the covers from O rings. Place the filter cartridge cap, that was set aside earlier, on the new filter by aligning the ridge on the cap with the arrow on the filter. Turn the cap clock-wise until it stops and snaps into place.
    Hold the assembled cap and filter unit by the lip on the cap so that the filter cartridge arrow is facing up.
    Align the filtering cap unit with the opening in the grill base and push the new filter into the hole. Once the filter is completely inserted, the eject button will pop back out. 

    Check out comparable fridge filter models including: