Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • How to Install Whirlpool W10295370 Interior Fridge Filter Video

    Welcome to the How to Install Whirlpool W10295370 Interior Fridge Filter Video Page.

    The Whirlpool W10295370 Premium Push Button Refrigerator Water Filter is used in Whirlpool side-by-side refrigerators with filter access in the interior. The Whirlpool Genuine OEM W10295370 Water Filter is NSF standard 42 & 53 Certified to reduce cysts, asbestos, chlorine taste and odor, particulates (class I), lead, and mercury. The Whirlpool W10295370 has a filter life of up to 6 months. The water filter life will also depend on the quality of your water and your water usage. The filter should be replaced sooner if you notice tastes and odors returning to the water, the water pressure is greatly decreasing, or the filter monitor light on the refrigerator has turned red. 

    How to Install Whirlpool W10295370 Interior Fridge Filter Video Transcript:

    To change your refrigerator water filter, first locate the water filter cover in the upper right hand corner of the refrigerator interior. Open the filter cover door by gently lifting it up. As the door opens, the filter will be released and eject slightly from the housing.
    Once the door is completely opened, pull the filter straight out and discard it. Remove the new filter from the packaging and take off the protective covers from the O-rings. Be sure to check that the O-rings are still in place after the covers are removed. Hold the filter so that the arrow on the label at the end of the filter cartridge is facing up.
    Align the filter with the opening and gently push the new filter into the hole. As you insert the filter, the cover door will begin to close. Do not force the filter into the housing. If it does not slide in easily, rotate the filter so that the notches are properly aligned with the grooves in the filter housing.
    To secure the filter within the housing, push firmly on the filter cover door until it snaps close. The final step of the filter change will be to run three gallons of water through the line to purge any air from the water system. 
    Comparable fridge filter models: