X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Pentek ECP5-10 Pleated Sediment Water Filters (9-3/4-inch x 2-5/8-inch)

SKU
PENTEK-ECP5-10
Price $16.99 List Price Price $23.99 Save 29%
Availability: In Stock
Choose a quantity
  • 1filter$16.99 
  • 3filters$15.99each
  • 6filters$15.29each
Pentek ECP5-10 water filter cartridges have a special formulation of resin-impregnated cellulose and polyester fibers. The Pentek ECP5-10 water filters provide higher wet strength than regular cellulose cartridges. The Pentek ECP5-10 water filters also provide high flow rates and dirt-holding capacity, while maintaining extremely low pressure drop. The Pentek ECP5-10 replacement filter cartridge has minimal unloading and media migration. The Pentek ECP5-10 water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together, forming a unitized end cap and gasket. The Pentek ECP water filter cartridges contain more media surface area than most competitive cartridges. The standard 10-inch ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet. The Pentek ECP5-10 replacement filter cartridge is not recommended for non-chlorinated water supplies. Cellulose may start to break down if there is bacteria present in well water or other non-chlorinated water supplies. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek ECP Series cartridges have end caps that are color-coded for micron rating: Tan = 1 micron, White = 5 micron, Blue = 20 micron and Yellow = 50 micron. Nominal 5 micron Pentek ECP5-10 Pleated Cellulose Polyester Water Filter Cartridge.
More Information
Package Qty 1
Used In Brands Cuno, Filterite, Harmsco, Keystone, Pentek, U.S. Water, US Filter
Manufacturer's Id ECP5-10
UPC 051678482438
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 3/4 inches (length) x 2 5/8 inches (outside diameter)
Actual Size (cm) 24.77 x 6.6675
Outside Diameter (inches) 2.625
Media Type Sediment Filter
Media Pleated Cellulose/Polyester
Primary Filter Media Pleated Cellulose Polyester
Materials of Construction Core: Polypropylene, End Caps: Vinyl Plastisol
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 6 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 5
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 10
Flow Rate (lpm) 37.854
Country of Manufacture Mexico
Additional Information End Cap Color: White

Reduced Contaminants

The PENTEK-ECP5-10 reduces the following contaminants:

  • Sediment

The PENTEK-ECP5-10 is comparable with the following part numbers

255482-43
ECP5-10
PENTEK-ECP5-10

User Guide