X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

10 X 4.5 Carbon Block Replacement Filter by Tier1 (10 micron)

SKU
TIER1-EPM10-934
Price $27.99 List Price Price $39.99 Save 30%
Availability: In Stock
Choose a quantity
  • 1filter$27.99 
  • 3filters$26.34each
  • 6filters$25.19each
Available Add-Ons
x

SKU: TIER1-OR-LUBRICANT-LG › See more product details

Dow Corning Molykote 111 O-Ring Silicone Lubricant (5.3 oz. Tube)

Add: $42.99 $29.99
x

SKU: TIER1-OR-100 › See more product details

American Plumber, Culligan, Pentek OR-100 O-Ring for Big Blue Housings

Add: $9.99 $6.99
  • Powder Activated Carbon Block reduces chlorine taste and odor
  • Engineered against clogging and plugging
  • Fits many common housings with a 10-inch x 4.5-inch size
› See more product details
  • Powder Activated Carbon Block reduces chlorine taste and odor
  • Engineered against clogging and plugging
  • Fits many common housings with a 10-inch x 4.5-inch size
The Pentek EPM-BB comparable water filter by Tier1 is a 10 x 4.5 inch whole house water filter that is ideal for situations requiring the reduction of dirt, sediment, sand, chlorine taste and odor. Powder Activated Carbon Block filter media reduces contaminants down to 10 microns, including chlorine taste and odor. The EPM10-934 by Tier1 works with many 10 x 4.5-inch filter housing applications. Order today!
More Information
Package Qty 1
Used In Brands Pentek, Tier1
Manufacturer's Id EPM10-934
UPC 700355941071
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9-3/4 inches (length) x 4-1/2 inches (outside diameter)
Actual Size (cm) 24.77 x 11.43
Outside Diameter (inches) 4.5
Media Type Carbon Filter
Media Powder Activated Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 15,000
Filter Life (liters) 56,781.15
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 6 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 10
Operating Temperature (°F) 40 - 180
Operating Temperature (°C) 4.4 - 82.2
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 2
Flow Rate (lpm) 7.571
Color White
Country of Manufacture China
Warranty Guarantee Unconditional Product Guarantee for Life of the Product

Reduced Contaminants

The TIER1-EPM10-934 reduces the following contaminants:

  • Chlorine Taste & Odor
  • Dirt
  • Sand
  • Sediment

The TIER1-EPM10-934 is comparable with the following part numbers

155782-43
PENTEK PM-BB
PENTEK 155782-43
TIER1-EPM10-934
EPM10-934

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  4. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
  5. Insert new filter cartridge.
  6. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  7. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.