We use cookies to make your experience better.
10 X 2.5 Inch 5 micron Polypropylene Replacement Filter by Tier1
SKU
TIER1-P5-10
Price $7.99 List Price Price $10.99 Save 27%
Availability: In Stock
Fits into most industry standard 10-inch water filtration system housings
Choose a quantity
1 Filter $7.99 -
3 Filters Price $7.52 each -
6 Filters Price $7.19 each
- Goes work immediately and lasts for up to 6 months
- Reduces many common contaminants from your water
- Polypropylene construction inhibits the growth of bacteria
- Supports a flow rate of up to 5 gallons per minute (gpm)
› See more product details
- Goes work immediately and lasts for up to 6 months
- Reduces many common contaminants from your water
- Polypropylene construction inhibits the growth of bacteria
- Supports a flow rate of up to 5 gallons per minute (gpm)
The Pentek P5 comparable whole house sediment water filter by Tier1 works hard providing you with cleaner, fresher great-tasting water. The P5-10 by Tier reduces contaminants down to 5 microns for up to six months. Affordably priced and using standardized sizing this filter is an excellent replacement filter for your whole house system housing. Enjoy the benefits of filtered water and order your replacement polypropylene sediment filter today!
Polypropylene-constructed filters inhibit bacterial growth making them an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you won't have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point-of-use systems.
The 10 X 2.5 polypropylene replacement filter by Tier1 is built to fit 10-inch x 2.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 2.5-inch filters. The P5-10 goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.
Package Qty | 1 |
---|---|
Used In Brands | Fulflo, Pentek, Tier1, Whirlpool |
Manufacturer's Id | P5-10 |
UPC | 799932624926 |
Advertised Size (in) | 10 x 2-1/2 |
Actual Size (in) | 9 7/8 inches (length) x 2 7/16 inches (outside diameter) |
Actual Size (cm) | 25.0825 x 6.19125 |
Outside Diameter (inches) | 2.4375 |
Primary Filter Media | Polypropylene |
Filter Life (gallons) | 8,000 |
Filter Life (liters) | 30,283.3 |
Filter Life (months) | 6 months |
Micron Rating (Nominal) | 5 |
Operating Temperature (°F) | 40 - 145 |
Operating Temperature (°C) | 4.4 - 62.8 |
Flow Rate (gpm) | 5 |
Flow Rate (lpm) | 18.927 |
Color | White |
Country of Manufacture | China |
Warranty Guarantee | Unconditional Product Guarantee for Life of the Product |
Includes | One 10 X 2.5 Inch Polypropylene Replacement Filter by Tier1 |
Instructions
- Turn off water supply. Press red pressure-relief button (if present)
- Unscrew housing. Remove large o-ring, wipe clean and set aside
- Discard used filter cartridge
- Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Insert new filter cartridge
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation