Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • Viqua


    Viqua S810-QL Lamp/ Quartz Sleeve Combo Pack

    • UV lamp and Quartz sleeve combination is ideal for full system refurbish

    • Easy do it yourself replacement

    • Reduces health risks due to contaminants in water

    • Low maintenance UV system replacements

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Viqua
    UPC: 773058100908
    Media: Ultraviolet Light
    Brand: Viqua
    description Instructions
    1. Close main water supply to the UV System, and then open a tap downstream of the UV System to release pressure.
    2. Disconnect main power source and allow the unit to cool for 10 minutes. Note: Ensure there is no other power source connected such as, Solenoid Junction Box.
    3. Remove the UV lamp connector and the UV lamp
    4. (SEE STEP 7-9) Re-insert the new UV lamp inside the quartz sleeve. Attach the connector to the UV lamp and note that the connector will only allow correct installation in one position. Place and tighten the UV lamp connector.
    5. Plug the unit back to the power source. Reset the end of lamp timer alarm back to 365 days.
    6. Close the downstream tap once the UV chamber is filled with water, and inspect for any leakages.
    7. (Quartz Sleeve) Remove the top retaining nut and O-ring. Remove the bottom retaining nut, Spring and loosen the O-ring to drain the water. Remove the quartz sleeve from the UV chamber.
    8. Clean the quartz sleeve with a cloth soaked in CLR, vinegar or some other mild acid and then rinse with water.
    9. Re-insert the quartz sleeve with O-ring(s), Spring, and retaining nut(s). Hand tighten the retaining nut(s), taking care not to over-tighten.
    warning_amber Contaminants Reduced
  • Bacteria
  • Cryptosporidium
  • Cysts
  • Ecoli
  • Giardia
  • Viruses
  • filter_alt Filter Life
    Filter Life (gallons): 12 months

    The Viqua S810-QL Lamp/ Quartz Sleeve Combo Pack includes the lamp and quartz sleeve replacement for the S8Q-PA system. These components work together to provide the contaminant reducing power behind your UV system. The quartz sleeve protects the UV lamp from being in contact with your water and from build up of small matter in water with use. This build up means the sleeve should be cleaned about every three months to ensure that the system continues to operate at full efficiency, when the sleeve can no longer be cleaned it must be replaced. The lamp itself has an average filter life of approximately twelve months, depending on your system various controllers (BA-ICE-S Viqua UV Disinfection System Controller in this instance) and sensors can be installed to measure light given off to monitor status and alert you when it it time for a replacement. Enjoy the continuing clarity of your water by investing in the Viqua S810-QL Lamp/ Quartz Sleeve Combo Pack today!