IN-WF1150 Replacement Inline Water Filter for the DA29-10105J

The Samsung DA29-10105J Refrigerator Water Filter Replacement Comparable by Tier1 provides cleaner and fresher tasting water for up to six months after installation. The IN-WF1150 is designed to fit refrigerators without a built-in filter system, making it one of Tier1's most flexible products. Whether you are in the city or the suburbs, the Tier1 IN-WF1150 is an ideal choice for your drinking water filtration needs. Order this Tier1 refrigerator water inline filter, comparable to the Samsung DA29-10105J, today!

• Designed for refrigerators without a built-in filter
• Lasts for up to six months, or 300 gallons, depending on use
• Reduces chlorine taste and odor, providing a cleaner fresher taste
• A cost effective alternative to expensive brand name refrigerator water filters

Used In Brands	Daewoo, Frigidaire, GE, Kenmore, KitchenAid, LG, Samsung, Whirlpool
Manufacturer's Id	IN-WF1150
UPC	689466299168
Actual Size (in)	9 inches (length) x 2 inches (outside diameter)
Actual Size (cm)	22.86 x 5.08
Primary Filter Media	Activated Carbon Block
Filter Life (gallons)	200
Filter Life (liters)	757.082
Filter Life (months)	6 months
Operating Pressure (psi)	20 - 120
Operating Temperature (°F)	40 - 125
Operating Temperature (°C)	4.4 - 51.7
Flow Rate (gpm)	757.082
Flow Rate (lpm)	2.8
Fitting Type	Compression
Fitting Size (inches)	1/4 inch
Certifications	Independently Tested against NSF/ANSI Standard 42
Warranty Guarantee	Unconditional Product Guarantee for Life of the Product
Additional Information	NSF/ANSI 61, WQA Certified for Material Safety and Structure Integrity
Primary Filter Media	Activated Carbon Block

Instructions

1. 1. Shut off water supply
2. 2. Disconnect old cartridge from system
3. 3. Unscrew the threaded filter nut on end then then align the water filter with arrow flow mark toward refrigerator
4. 4. Connect the water line through the nut, tightly onto end of filter
5. 5. Screw the nut back onto the end of the filter to seal it
6. 6. Insert filter clip (shown in installation manual)
7. 7. Turn on the water and check for leaks
8. 8. If leaks occur, repeat installation steps (if leaks persist, discontinue use and call for support)
9. 9. Flush the filter for 5 minutes before use