Tier1 Brand Replacement Filter for 817-0050, 03FIL1400, 25252, 378902 & PWW50

Tier1 PAS-1620 Replacement Pool and Spa Filter fits the Waterway Front Access Skimmer and Aber Hot Tubs. Tier1 Pool and Spa filters will protect your equipment from contaminants such as sediment and sand and are engineered to outperform the competition and exceed your expectations. This filter features high durability filter fabric that maintains strength even when loaded with sediment, a tighter porosity and denser weave to capture more contaminants in less time, and a high strength, high flow core designed to support the filter while providing industry leading flow rates. Tier1 Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Dive in with Tier1, the water's great!

• Worry-free sediment reduction for 3 months
• Cost-effective replacement
• Pleated filter design captures and retains more particles
• Pleats can be rinsed to prolong effective life

Manufacturer's Id	PAS-1620
UPC	799932636196
Actual Size (in)	7 5/8 inches (length) x 6 inches (outside diameter)
Actual Size (cm)	19.37 x 15.24
Primary Filter Media	Pleated Fabric
Media Square Feet	40
Media Weight (oz)	3
Filter Life (months)	3 months
Warranty Guarantee	30 day 100% satisfaction guarantee
Additional Information	Some systems may require 2 or more filters
Primary Filter Media	Pleated Fabric

Instructions

1. 1. It is time to clean or replace your filter cartridge when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when a new cartridge has been installed.
2. 2. It is also time to clean or replace your filter cartridge if there is a noticeable decrease in the pressure coming from your return jets.
3. 3. Turn the power off to your pump and bleed the excess air pressure of the system using the air valve on the filter.
4. 4. Remove any band clamps and/or lids to your filter.
5. 5. Remove the cartridge from the filter canister and dislodge any loose debris by directing a stream of water from a garden hose between each pleat.
6. 6. Do not use a high pressure car wash wand or a stiff brush to clean your cartridge. These abrasive methods may damage the filter media and snap the bands.
7. 7. Apply a spray on filter cleaner to the cartridge or grid to remove any oils or other organics. If stubborn stains persist, soak the cartridge overnight in a solution of TSP (trisodium phosphate).
8. 8. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.
9. 9. Restart your filtration system per manufacturer’s instructions.