10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (20 micron) - WaterFilters.NET

Warranty Info

Warranty Guarantee: Unconditional Guarantee for Life of the Product

Tier1

TIER1-P20-10

10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (20 micron)

Name: 10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (20 micron)
Brand: Tier1
SKU: TIER1-P20-10
Price: 5.44 USD
Availability: InStock

High Stock (117)

.price-ui--loading { display: block !important; opacity: 1 !important; }

$5.44 - $114.89

Price Per Item

2 PACK	$5.27
4 PACK	$5.11
6 PACK	$4.95
24 PACK	$4.78

Choose a Pack Size for Your Volume Discount:

Single

2 PACK

4 PACK

6 PACK

24 PACK

Qty

Bonded Polypropylene filter media
Brings you cleaner water along with an easy installation
Fits many common housings with a 10 inch by 2.5 inch size

Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: P20-10

UPC: 799932619823

Actual Size (in): 9-7/8 inches (length) x 2-1/2 inches (outside diameter)

Media: Spun Wound Polypropylene

Primary Filter Media: Polypropylene

Operating Temperature (°F): 40 - 145

Operating Temperature (°C): 4.4 - 62.8

Warranty Guarantee: Unconditional Guarantee for Life of the Product

Brand: Tier1

Advertised Size: 10 x 2-1/2

Length (in): 9.88 in

Outside Diameter (in): 2.5 in

Media Type: Sediment Filter

UPC's For Search: 799932619823

Country of Origin: China

Micron Rating Nominal: 20

Flow Rate (gpm): 5.0

Instructions

Turn off water supply. Press red pressure-relief button (if present).
Unscrew housing. Remove large o-ring, wipe clean and set aside.
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
Insert new filter cartridge.
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.

Contaminants Reduced

Particulates

Sediment

Filter Life

Filter Life (months): 6 months

Warranty Info

Warranty Guarantee: Unconditional Guarantee for Life of the Product

Check Our Comparable Products

Product Details

The Pentek P20 Comparable Whole House Sediment Water Filter by Tier1 is a 10 x 2.5 inch whole house sediment water filter manufactured for residential applications that require the reduction of sediment. The Tier1 P20-10 Bonded Polypropylene filter reduces impurities down to 20 microns, confronting water contaminants head on. Order today!

Comparable Part Number

	10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (20 micron)	Hydronix SDC-25-1020 Sediment Polypropylene Water Filter Cartridges	Purtrex PX20-9-78 Replacement Filter Cartridge	20 Micron Melt Blown Sediment Filter by USWF 10"x2.5"
Product Price	$5.44	$7.69	$8.39	$3.73
Product SKU	TIER1-P20-10	HYDRONIX-SDC-25-1020	PURTREX-PX20-9-78	USWF-MB20-1025
Filter Life (months)	6 months	2 months	3 months	6 months
Primary Filter Media	Polypropylene	Polypropylene	Polypropylene	Meltblown Polypropylene
Micron Rating (Nominal)	20	20	20	20
Actual Size (in)	9-7/8 inches (length) x 2-1/2 inches (outside diameter)	9 7/8 inches (length) x 2 1/2 inches (outside diameter)	9-7/8 inches (length) x 2-1/2 inches (outside diameter)	9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Country of Manufacture	China	—	United States	United States

10 X 2.5 Spun Wound Polypropylene Replacement Filter by Tier1 (20 micron)

TIER1-P20-10 is comparable with the following part number(s)

Customer also purchased