Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1_P5_20BB_6_PACK
20 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
Backordered
$15.46 - $326.52
Fits most stand housings built for 20-inch x 4.5 inch filter cartridges
| Price Per Item | |
|---|---|
| 2 PACK | $14.99 |
| 4 PACK | $14.53 |
| 6 PACK | $14.06 |
| 24 PACK | $13.60 |
Features & Specs
Features & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: P5-20BB
UPC: 799932624957
Actual Size (in): 20 inches (length) x 4 1/4 inches (outside diameter)
Media: Spun Wound Polypropylene
Primary Filter Media: Polypropylene
Operating Temperature (°F): 40 - 145
Operating Temperature (°C): 4.4 - 62.8
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 20 x 4-1/2
Depth (in): 4.25 in
Length (in): 20 in
Outside Diameter (in): 4.25 in
Width (in): 4.25 in
Media Type: Sediment Filter
UPC's For Search: 799932624957 | 10051678358433 | 51678358436
Micron Rating Nominal: 5
Flow Rate (gpm): 20.0
Includes: One Tier1 20 x 4.375 inch Spun Wound Polypropylene Replacement Filter
Instructions
Instructions- Turn off water supply. Press red pressure-relief button (if present)
- Unscrew housing. Remove large o-ring, wipe clean and set aside
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Insert new filter cartridge
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
Contaminants Reduced
Contaminants Reduced
Filter Life
Filter Life
Filter Life (months): 6 months
Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
The Pentek DGD-5005-20 comparable whole house sediment water filter by Tier1 is ideal for applications requiring filtration down to 5 microns. The P5-20BB installs quickly and easily, making filter changes a breeze. Polypropylene construction means this filter inhibits bacterial growth and allows the Tier1 P5-20BB to be an ideal solution for both municipal and well water sources. Capable of reducing contaminants such as dirt, sediment, sand, silt, and rust and corrosion you can count on this filter providing cleaner water throughout your home and in every glass of water.
20 X 4.5 spun wound polypropylene replacement filter by Tier1 is built to fit 20-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 20 x 4.5 inch filters. The P5-20BB goes to work immediately providing cleaner, fresher and better tasting water for up to six months. Enjoy cleaner better tasting water with your whole house replacement filter today.
TIER1_P5_20BB_6_PACK is comparable with the following part number(s)
- 155358-43
- C155358-43
- DGD-5005-20
- FPMB-BB5-20
- Hydronix SDC-45-2005
- P50-20BB
- P5-20BB
- PENTEK-DGD-5005-20
- SDC-45-2005
- SDF-45-2005
- TIER1-P5-20BB
TIER1_P5_20BB_6_PACK fits the following model number(s)
- AP802
- CFS22
- PENTEK-150166
- All 20 x 4.5 inch Big Blue filter housings
 |  |  |  | |
|---|---|---|---|---|
Product Price |
$84.41 |
$41.86 |
$26.59 |
$19.06 |
Product SKU |
TIER1_P5_20BB_6_PACK
|
VIQUA-CMB-520-HF
|
PENTEK-DGD-5005-20
|
USWF-MB5-2045
|
Filter Life (months) |
|
|
|
|
Primary Filter Media |
|
|
|
|
Micron Rating (Nominal) |
|
|
|
|
Actual Size (in) |
|
|
|
|
Country of Manufacture |
—
|
—
|
|
|